Loading ...
Loading ...
Loading ...
10
English / English
Congratulations on purchasing our product. Your satisfaction is the first requirement
that our products must meet: the same satisfaction as the one gained by those who
long for experiencing the car audio emotion. This manual has been drawn to provide
the main instructions required to install and use the system properly. However,
the range of possible applications is wide; for further information, please feel free
to contact your trusted dealer or our technical support at the email support@
elettromedia.it Before installing the components, please carefully read all of the
instructions contained in this manual. Failure to respect these instructions may
cause unintentional harm or damage to the product.
1. All components must be firmly secured to the vehicle structure. Do the same
when installing any custom structures you may have built. Confirm your installation
is solid and safe. A component coming loose while driving may cause serious
damage to the passengers, as well as to other vehicles.
2. Always wear protective eyewear when using tools, as splints or product residue
may become airborne.
3. In order to avoid incidental damage, keep the product in the original packaging
until you are ready for the final installation.
4. Do not carry out any installation inside the engine compartment.
5. Before starting with the installation turn the head unit and all other audio
system devices off, avoiding any possible damage.
6. Make sure that the location you choose to install the components does not
interfere with the normal operation of any mechanical or electrical devices of
the vehicle.
7. Do not install loudspeakers where they may be exposed to water, excessive
humidity, dust or dirt.
8. Do not install the tweeter without the protective grille.
9. Do not install the components or make cable run close to electronic or mechanical
devices of the vehicle.
10. Be very cautious when drilling or cutting into the vehicle chassis, making sure
there are no cables or structural elements essential to the vehicle underneath
or in the selected area.
11. When routing cables, make sure that the cable does not come in contact with
sharp edges or near moving mechanical devices. Make sure that it is firmly
attached and protected along its entire length and its insulation is self-extinguishing.
12. Only use cables with the proper section (AWG) indicated herein.
13. When running the cable through a hole in the vehicles chassis, protect the
cable with a rubber ring (grommet). Be sure to provide proper protection for
cables running close to heat-generating devices.
14. Do not run the wires outside of the vehicle.
15. Use top quality cables, connectors and accessories such as found in the
Connection catalogue.
16. Warranty certificate: For more information visit the Hertz website.
SAFE SOUND
USE COMMON SENSE AND PRACTICE SAFE SOUND. PLEASE REMEMBER THAT
LONG EXPOSURE TO EXCESSIVELY HIGH SOUND PRESSURE LEVELS MAY DAMAGE
YOUR HEARING. SAFETY MUST BE AT THE FOREFRONT WHILE DRIVING.
Information on electrical and electronic equipment waste (for those European countries which
organize the separate collection of waste)
Products which are marked with a wheeled bin with an X through it can not be disposed
of together with ordinary domestic waste. These electrical and electronic products must
be recycled in proper facilities, capable of managing the disposal of these products and
components. In order to know where and how to deliver these products to the nearest
recycling/disposal site please contact your local municipal office. Recycling and disposing
of waste in a proper way contributes to the protection of the environment and to prevent
harmful effects on health.
Loading ...
Loading ...
Loading ...