Loading ...
Loading ...
Loading ...
ENGLISH
11
OPERATION
WARNING: To reduce the risk of serious personal injury, turn unit off and lock
the trigger before making any adjustments or removing/installing attachments
or accessories. An accidental start‑up can causeinjury.
Change Blade
Remove Blade (Fig. A, C)
1. Insert thin screwdriver into the spindle lock port 8.
2. Insert a flat screwdrivers or coin into the blade bolt5slot.
3. Turn blade bolt counterclockwise to loosen and removebolt.
4. Slide blade 4 out past the shoe 9.
Fit New Blade (Fig. A, C)
1. Slide new blade over shoe and align slots in blade against the 2 drive pins 11.
2. Ensure beveled edges 12 are facing outwards
3. Refit blade bolt and tighten.
4. Remove screwdriver from the spindle lock port.
NOTE: Before cutting any type of material, be sure it is firmly anchored or clamped to
preventslipping.
1. Always hold cutter firmly whilecutting.
2. Lightly place blade against work to be cut as shown in Fig. E.
3. To switch the tool on, pull the trigger 1 as shown in Fig. F.
4. Press the lock out button 2 once to make the tool turn on and remainon.
5. To switch the tool off, release thetrigger.
WARNING: Cut hazard. Keep fingers away fromblades.
WARNING: Always use proper eye protection that conforms to ANSI Z87.1(CAN/ CSA
Z94.3) while operating this powertool.
WARNING: Do not operate the cutter while it is charging.
Proper Hand Position (Fig. D)
WARNING: To reduce the risk of serious personal injury, ALWAYS use proper hand position
as shown.
WARNING: To reduce the risk of serious personal injury, ALWAYS hold securely in
anticipation of a sudden reaction.
Proper hand position requires one hand on the main handle.
Loading ...
Loading ...
Loading ...