Loading ...
Loading ...
Loading ...
Door Panels for Dispenser Models
The two freezer panels combined should not weigh more than
30 Ibs (13.5 kg). The refrigerator panel should not weigh more
than 50 Ibs (23 kg).
237/16"
59,5 cm)
_L
347/le ''
87,4 cm)
m
Model A B
36 141/4'' (36.2 cm) 191/4'' (48.9 cm)
42 163/4'' (42.6 cm) 223/4'' (57.8 cm)
48 191/4'' (48.9 cm) 261/4'' (66.7 cm)
707/16''
(179 cm)
r
Top Grille Panel - Routing Requirements
Top and bottom edges of the top panel should be edge routed
1/2"(1.3 cm) and %" (9.5 mm), respectively. Both ends should be
edge routed 7/8"(2.2 cm) as shown.
lJ,,,TL
(6.35 ram)
max.
(2.2 cm)
Top
Grille
I! 1/4"
(6.35 mm)
Top J max.
Grille
(2.2 cm)
NOTE: When creating a panel with face detail, the offsets will be
hidden and must be accounted for in order to center the detail in
the top grille.
(6.35 ram) max.
1/2" J Top
(1.3cm)
rnin.
Center face
detail between i_._
offsets
(9.5 ram)
rain. Bottom
Door Panels - Routing Requirements
If an extended handle kit is used, then routing the handle side of
the panels is not required. See "Classic Series Factory Panels
and Kits" for more information on ordering extended handles.
If the standard handle is used, rout the entire handle side of both
panels 31/4'' (8.25 cm) to allow for finger clearance. Then rout the
other sides 1" (2.54 cm).
Standard Handle - Top View
31/4"
(8.25 cm)
mln.
_d
I
° t
1
1/4,,(6.35 ram) max. |
[
I
2" (5 cm)
min,
Door
Panel
Door Panel - Side View
Hinge Side
__]
Door Io
Panel
1"
(2.64cm)
1/2" (1.3 cm)
C
O-
12
Loading ...
Loading ...
Loading ...