Loading ...
Loading ...
Loading ...
WATER DRAINAGE METHOD
Middle drainage
When running the unit in Dry mode, you can choose the way to drain:
1. Unplug the unit from the power source.
2. Remove the drain cap (Fig.A). While doing this operation some residual water may spill
so please have a pan to collect the water.
3. Connect the drain hose (1/2" or 12.7mm, not supplied ) (Fig.B).
4. The water can be continuously drained through the hose into a floor drain or bucket.
5. Turn on the unit.
NOTE:
● Condensate may flow out after removing the drain cap, if the unit is running in Cool and
Dry mode. When you want to remove the garden hose, prepare a drip tray (not supplied)
to collect the condensate from the drain outlet.
● Please be sure that the height of the drain and section of the drain hose should not be
higher than that of the drain outlet, or the continous drainage may not work properly
(Fig.C & Fig.D ).
● During Cool mode, it is recommended to disable continuous drainage by replacing the
drain cap to the drain outlet, to reach the maximum performance.
Fig.A Fig.B
Fig.C Fig.D
25
Loading ...
Loading ...
Loading ...