Loading ...
Loading ...
Loading ...
HEAT mode *
*means only the heat pump model have this function.
If the appliance is cooling only, when choose this function,
will turn to FAN mode.
● Press the button a number of times until the
symbol appears.
● Select the target temperature 55℉-81℉ (13℃-27℃) by pressing
the or button until the corresponding value is displayed.
● Select the required fan speed by pressing the button.
Four speeds are available: High / Medium / Low / Auto.
● Water is removed from the air and collected in the tank.
● When the tank is full, the appliance shuts down and “ ” (full tank) appears on the
display. The tank cap must be extracted and emptied. Run off all water left into a
basin. When all the water has been drained, put the cap back in place.
● When the tank has been emptied, the appliance starts up again.
NOTE:
- When operating in very cold rooms, the appliance will defreeze automatically,
momentarily interrupting normal operation. appears on the display during this
process. During this operation, it is normal for the noise made by the appliance to
change.
- In this mode, you may have to wait for a few minutes before the appliance starts
giving out hot air.
- In this mode, the fan may operate for short periods, even though the set temperature
has already been reached.
FAN mode
When using the appliance in this mode, the air hose does not
need to be attached.
● Press the button a number of times until the “ ” symbol
appears.
● Select the required fan speed by pressing the button.
Three speeds are available: High / Medium / Low.
19
MANUAL OF REMOTE CONTROL
Loading ...
Loading ...
Loading ...