Loading ...
Loading ...
Loading ...
10
Spirit Fitness
CR800 STEP THREE
HARDWARE FOR STEP 3
PART TYPE DESCRIPTION QTY
68 HEX HEAD BOLT
5/16”X5/8”
8
76 FLAT WASHER
ø8 x ø19 x 1.5T
6
82 SPLIT WASHER
ø5/16” x 1.5T
2
83 CURVED WASHER
ø5/16” x 19 x 1.5T
2
1. Install the Console Mast Cover (No.31) onto the
Console Mast (No.2), making sure it is facing the
correct direction as in the picture below. Run the two
wire harnesses through the bottom of the console mast
tube and out the top opening.
2. Pull the Computer Cable (No.44) and the Handpulse
Wire (No.45) through Console Mast (No.2)
3. Slide the Console Mast into the Main Frame (No.1)
being careful to not pinch the wires. Fasten the
console mast with 6 Hex Head Bolts (No.68) and 4
Flat Washers (No.76) on the side bolts and 2 Curved
Washers (No.83) on the front bolts. Snap the Console
Mast Cover (No.31) in place.
4. Install the Front Handlebars (No.3) onto the Console
Mast (No.2) with 2 Hex Head Bolts (No.68), Split
Washers (No.82) and Flat Washers (No.76).
R
L
R
L
Loading ...
Loading ...
Loading ...