Loading ...
Loading ...
Loading ...
Control panel
Dryer exterior
Stainless steel or anonized drum
CARE AND MAINTENANCE
30
•
•
•
Clean with a soft, damp cloth. Do not use abrasive substances.
Do not spray cleaners directly on the panel.
The control panel finish may be damaged by some laundry pre-treatment
soil and stain remover products. Apply such products away from your
dryer and wipe up any spills or overspray immediately.
•
•
•
•
•
Clean with a soft, damp cloth. Do not use abrasive substances.
Protect the surface from sharp objects.
Do not place any heavy or sharp objects or a detergent box on the dryer.
Keep them on the purchased pedestal or in a separate storage box. This
may scratch or damage the top cover of the dryer.
Since the entire dryer has a high-gloss finish, the surface can be
scratched or damaged.
Avoid scratching or damaging the surface when using the dryer.
•
•
To clean the stainless steel or anonized drum, use a damp cloth with a
mild, non-abrasive cleaner suitable for stainless steel and anonized
surfaces.
Remove the cleaner residue and dry with a clean cloth.
WARNING
Certain internal parts are intentionally not grounded and may present a
risk of electric shock only during servicing. Service Personnel – Do not
contact the following parts while the appliance is energized: Main Motor,
Cooling Fan. Do no touch the heat exchanger with your hand, which may
cause an injury.
DRYER CARE
Requirements
Installation
Instructions
Dryer Use
Dryer Care
Troublesho
o
ting
Safety and
Precautions
Installation
Loading ...
Loading ...
Loading ...