Loading ...
Loading ...
Loading ...
- 24 -
To keep the engine in sound condition, the user should maintain it according to the
table below.
CAUTION:
Use parts that the manufacturer supplies; otherwise, damage to the engine may
occur.
WARNING:
Stop the engine before servicing. If servicing is required with the engine running,
ensure there is good ventilation in the area. Exhaust emissions contain toxic
carbon monoxide which may cause injury or be fatal if inhaled. ENGINE OIL
REPLACEMENT
Place the machine on a level surface and warm up the engine for several minutes.
Then stop the engine. Remove the oil filler cap.
Place an oil pan under the engine. Remove the oil drain plug so that the oil can be
completely drained. You will need to use a tube or other similar device to prevent
the oil from leaking onto the frame of the pressure washer.
Check the oil drain plug, gasket oil filler cap, and O-ring; if damaged, replace them.
Reinstall the oil drain plug.
Add engine oil up to the upper level of the dipstick.
NOTE:
Do not dump oil containers or discard engine oil into rubbish boxes or into the
ground. For environmental protection take discarded engine oil in a closed
container to a recycling station.
NOTES:
* Only for inside ventilating double-core carburetors.
**Only for paper core air cleaners.
I.More often than in schedule if used in dusty conditions
2.Items to be done by dealer unless you are fully trained and equipped to do so
.
Item
Each
time
First month
or 20 hours
Each
month or
50 hours
Each 6
months or
100 hours
Each year
or
300 hours
Loading ...
Loading ...
Loading ...