Loading ...
Loading ...
Loading ...
OPENING THE SAFE FOR THE FIRST TIME
1. Pull out the key whole cap located in front of the keypad.
2. Insert the override key and turn counter-clockwise.
3. The lid will open automatically. When the door has opened turn the key clockwise and remove it.
CHANGING THE BATTERIES
1. With the lid open, take out the black liner from inside the safe. The battery box is located in the front of the safe,
remove battery cover; the battery box will come out.
2. Insert 4 AA alkaline batteries.
3. To make sure the batteries are installed correctly, press a number on the keypad. A green light will appear if the batteries are
installed and have enough power.
SETTING YOUR PERSONAL IDENTIFICATION NUMBER (PIN)
1. Press any key to activate the keypad.
2. Press “0” + “0” + “#” and factory preset code of 1,6,8 + “#”.
3. Input your new PIN (3-6 digits) then press “*”.
4. Input your new PIN again followed by the “#”. You will hear one beep to inform you that the new code has been
set successfully.
INSTANT MANUAL
“0”+”0”+” # “ + “previous code “+ “#” + “ new code “ + “ #” + “code” (repeat new code) + “#” followed by a long beep.
For example: previous code 168 , new code 6699, operate: 00#168#6699#6699#
OPENING AND CLOSING THE SAFE
1. To open the safe: Input your own PIN then press “#”. the safe will automatically open.
2. Caution: If you input an incorrect code (3) times, the safe will lock you out for 40 seconds.
3. To close the safe, push the door closed - it will lock automatically.
IMPORTANT! DO NOT store your keys inside the safe!
ATTACHING TO THE BASE
1. Remove the safe from the installing base; open the safe, press the active pole in the front of the safe (see photos above ) and lift
the front of the safe. Move forward to separate the safe from the base.
2. Afx the base by four screws.
3. Install the safe on to the base. Insert the hooks into the back of the safe, press the front of the safe downward until you hear
a “click”, this will let you know that the safe has been afx properly to the base.
7650 Paragon Lock & Safe
Home Security Personal Safe
DIRECTION FOR USE
Thank you for choosing the 7650 Home Security Personal Safe by the Paragon Lock and Safe Co. It was
designed with the intent of being mobile. The safe plate can be mounted to the wall, oor, desk drawer, or in
a vehicle. Once mounted, you can depress the release switch inside the safe and transport your valuables. The
7650 Home Security Safe offers the exibility of 2 options to open; code or key. We’re so condent you’ll love
your new safe, we’re including a full 10 year warranty! Please take a moment to read this manual for important
use and safety information. Keep this manual in a safe place for future reference.
Copyright © Paragon Lock and Safe. All rights reserved.
8
Loading ...
Loading ...
Loading ...