Loading ...
Loading ...
Loading ...
7501 Paragon Lock & Safe
Electronic 5 Gun Rie Safe
INSTALLING THE SAFE
Select where you want your safe positioned and set it in place. Once positioned, we require it be anchored to the oor for
additional safety and security. Locate the anchoring holes in the bottom oor and back panel of safe. Determine if you will be
anchoring into wood or concrete oor. If you are anchoring into a wood oor, use lag bolts. The length of the lag bolt will be
determined by the thickness of the oor but try to use at least 2 inches. If you are anchoring into a concrete oor, use concrete
sleeve anchors, which are at least 2 inches long. The holes for the anchors can be drilled through the holes that are already in the
safe. You do not need to move the safe to install the anchoring bolts.
NOTE: After the anchor bolts are installed, carefully open and close the safe door and check for smooth operation of the locking
mechanism. If any resistance is encountered, check the safe for being level.
WARNING: The safe MUST BE bolted to the oor before use. Serious injury could occur if the safe is not bolted down.
If the safe is sitting on carpet or an uneven surface, it could topple over when the door is open.
Copyright © Paragon Lock and Safe. All rights reserved.
11
Loading ...
Loading ...
Loading ...