Loading ...
Loading ...
Loading ...
SabbathMode
This setting meets the religious requirements on the Sabbath
and Jewish festivals. Turn on SabbathMode to switch off
certain controls. This means you can use the appliance without
anyone changing the settings.
You can find a list of Star-K-certified appliances at www.star-
k.org/appliances.
WARNING
Danger of food poisoning.
If there is a power cut while the appliance is in SabbathMode,
this message is not saved. Once power is restored, the appli-
ance continues in SabbathMode. When this mode is over no
message about the power cut is displayed on the temperature
display.
If there was a power cut during SabbathMode:
u
Check the food for quality. Do not eat the food if it has
thawed.
What happens on the appliance when in SabbathMode:
-
The Status display permanently shows SabbathMode.
-
The display is locked for all functions apart from turning off
SabbathMode.
-
Any functions/settings that are already on, remain active.
-
The display stays bright when the door is closed.
-
Reminders are disabled. The set time intervals are also
paused. This function is disabled in SabbathMode.
-
Reminders and warnings are not displayed. There are no
acoustic signals, and the display does not show warnings or
settings such as temperature alarm or door alarm.
-
The internal light is off.
-
The defrost cycle only works for the specified time without
taking account of fridge use.
-
After a power cut the appliance automatically returns to
SabbathMode.
Activating/deactivating SabbathMode
u
To activate this function, swipe the display until you see
Settings
in the menu and press for 1 second. The menu
changes to show the available settings.
u
Swipe the display until you see the SabbathMode (Menora)
symbol. Press the symbol for 3 seconds.
w
The display changes colour.
w
SabbathMode is activated.
To deactivate the function, press the display for 3 seconds.
SabbathMode is deactivated.
CleaningMode
Use this setting to easily clean the appliance.
This setting refers to the fridge section
Fig. 1 (A)
.
Use:
-
Clean the fridge section by hand.
What happens on the appliance when this setting is on:
-
The display permanently shows: CleaningMode.
-
The fridge section is switched off.
-
The internal light is on.
-
Reminders and warnings are not shown. There is no
acoustic signal.
Activating/deactivating settings
u
Activating/deactivating the setting (see 6.2 Control
concept) .
w
On: fridge section is off. Light stays on.
w
Off: preset temperature is restored.
After 60 min the setting turns off automatically. The appliance
then continues running in normal mode.
D-Value
The stainless steel rear wall is inside the appliance on delivery.
The
D-Value
is set to D1. You can remove the stainless steel
back wall for cleaning.
The appliance is designed for use with and without the stain-
less steel rear panel, so the appliance can be operated without
it. If the appliance is use without the stainless steel rear panel,
the
D-Value
must be set to D2.
Note
Liebherr recommends the following:
u
Operate the appliance with stainless steel rear wall to avoid
visible condensation and goods freezing to the rear wall or
each other.
Choose the setting
u
Set the size in the Customer menu (see 6.2 Control
concept) .
Reminder
Reminders are given out acoustically by a beep and visually by
a symbol in the display. The signal gets louder until the alert
stops.
Replace FreshAir active carbon filter
This message appears when the air filter needs replacing.
u
Change the air filter every six months.
u
Confirm the message with OK.
w
The service interval resets.
w
The air filter guarantees the air quality in the fridge.
Activating the setting
u
Activating/deactivating (see 6.2 Control concept) .
Reset
This function resets all settings to the factory settings. All
settings that you have made thus far will be reset to their orig-
inal values.
Activating the setting
u
Activate (see 6.2 Control concept) .
Turn off appliance
This setting turns off the whole appliance.
Controls
* Depending on model and options 11
Loading ...
Loading ...
Loading ...