Loading ...
Loading ...
Loading ...
WARNING
If the blade jams on an electrical cord or line, DO NOT
TOUCH THE BLADE! IT CAN BE LIVE AND
DANGEROUS. Do the steps below:
1. Hold the insulated rear handle or put the machine down
and away from you.
2. Disconnect the electrically service to the damaged line
or cord before you try to free the blade.
10.1 START THE MACHINE
7
8
1. Pull the lock-out button with your thumb backward.
2. Press the trigger at the same time.
10.2
STOP THE MACHINE
1. Release the trigger to stop the machine.
10.3 ADJUST THE TRIMMER HEAD
ANGLE
-30º
0º
75º
The trimmer head can be locked into 7 positions.
1. Pull the pivot button and move the head forward or
backward to your desired position.
2.
Release the pivot button.
WARNING
The trimmer head should lock securely in place.
11 MAINTENANCE
CAUTION
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
CAUTION
Do not use strong solvents or detergents on the plastic
housing or components.
W
ARNING
Remove the battery pack from the machine before
maintenance.
11.1 CLEAN THE MACHINE
WARNING
Keep the machine and the motor free of leaves, branches or
excessive oil to prevent fire risks.
• Use a moist cloth with a mild detergent to clean the
machine.
• Clean all moisture with a soft dry cloth.
•
Use a small brush to clean the air vents.
11.2 LUBRICATE THE BLADE
To increase the efficiency and life of the blades, lubricate
them carefully after each work session:
• Do not oil the blade while the hedge trimmer is running.
•
Put the machine on a flat and smooth surface.
• Use a soft cloth to clean the blades and a brush to remove
more dirt.
• Use a light layer of oil to lubricate the blades along the
top edge of the blade.
NOTE
We recommend to use the non-pollutant type oil.
12 STORE THE MACHINE
NOTE
Clean the machine before storage.
1. Remove the battery pack.
2.
Let the motor cool.
8
English
EN
Loading ...
Loading ...
Loading ...