Loading ...
Loading ...
Loading ...
Installation
Instructions
Pedestal
Model SPBD880
If gou have any questions, call 800.GE.CARES (800.432.2737) or visit our Website at: ge.com
In Canada, call 1.800.561.3344 or Visit our Website at: www.geappliances.ca
BEFORE YOU BEGIN
Read these instructions completely and carefully.
• IMPORTANT - Savetheseinstructions
for local inspector's use.
•IMPORTANT - Observe all governing
codes and ordinances.
• Note to Consumer - Keepthese instructions
with gour Owner's Manual for future reference.
• Completion time - 1 to 2 hours
• Proper installation is the responsibilitg of the installer.
• Product failure due to improper installation is not
covered under the Warrantg.
-A CAUTION - Due to the size and weight
of these products, and to reduce the risk of personal
injurg or damage to the product, TWO PEOPLEARE
REQUIREDFORPROPERINSTALLATION.
• See washer installation instructions for additional
installation requirements and guidelines.
KIT CONTENTS
4 Mounting Screws
Electric Cord
Quick Connect Hose
TOOLS YOU WILL NEED
Phillips Head Screwdriver
9/16" Open-End Wrench
or Adjustable Wrench
8 mm Socket Wrench
INSTALLATION PREPARATION
Remove the packaging.
The Installation Kit is taped at the top of the shipping
carton. Remove the kit and set aside for final installation.
Flatten the product carton to use as a pad to lag
the washer down on its side. Continue using the carton
to protect the finished floor in front of the installation
location.
B3
[]
REMOVE THE LEVELING LEGS
Carefullg lag the washer on its side to occess
the leveling legs on the bottom of the
appliance.
IMPORTANT: Do not lay the washer on its
back. Do not remove the shipping bolts on
the back side of the washer. The bolts must
remain in place until the washer is returned
to an upright position.
Use an open-end wrench to remove
the washer leveling legs.
_____ out and'
__ removeall
/4levelinglegs
12
Loading ...
Loading ...
Loading ...