Loading ...
Loading ...
Loading ...
www.jbl.com
English
99
5.2.2 To reconnect the last paired device
Your Bluetooth device is retained as a paired device when
the speaker goes to standby mode. Next time you switch to
the Bluetooth source, the speaker reconnects the last paired
device automatically.
5.2.3 To connect to another Bluetooth device
1. In the Bluetooth source, press .
→ The speaker enters the Bluetooth pairing mode.
2. Follow the Step 2 under “5.2.1 Connect a Bluetooth device”.
NOTES:
– The Bluetooth connection will be lost if the distance between the
speaker and Bluetooth device exceeds 33 ft (10 m).
– Electronic devices may cause radio interference. Devices that
generate electromagnetic waves must be kept away from the
speaker, such as microwaves and wireless LAN devices.
– Voice commands are not supported in Bluetooth mode.
5.3 Connect to an external audio device
• Connect the speaker to an external audio device using
a 3.5mm audio cable (sold separately), with one end
connected to the AUX socket on the speaker, and the other
end to the 3.5 mm audio output connector on the audio
device.
NOTE:
– After the audio cable is connected, ensure that no music plays
through Wi-Fi or Bluetooth to start music playback through the audio
cable.
6. VOICE ASSISTANTS
6.1 Set up your voice assistants
With the JBL One app on your Android or iOS devices, set up
Google Assistant, Alexa, or both.
• Follow the prompts to set up voice assistants in the JBL One
app immediately after connecting the speaker to your home
network (See “5.1 Connect to your home network”).”
• If the speaker is already connected to your home network
but has not completed the voice assistant setup, do the
following:
NOTE:
– Make sure your Android or iOS device is connected to the same
Wi-Fi network as your speaker.
6.2 Talk to your voice assistants
With concurrent voice assistants, ask either Google Assistant
or Alexa to play music, get answers, manage everyday tasks,
and control smart home devices using just your voice.
OFF ON
Voice assistant
status LED
1. Make sure that the speaker has been properly connected to
your home network and the microphone is turned on.
2. Just say “Hey Google” or “Alexa” to get started.
Examples:
• “Hey Google, play some music”
• “Hey Google, turn up the volume”
• “Alexa, set a timer for 15 minutes”
• “Alexa, stop”
Loading ...
Loading ...
Loading ...