Loading ...
Loading ...
Loading ...
ENGLISH
10
Three Year Limited Warranty
DeWALT
will repair or replace, without charge, any defects
due to faulty materials or workmanship for three years
from the date of purchase (two years for batteries). This
warranty does not cover part failure due to normal wear
or tool abuse. For further detail of warranty coverage and
warranty repair information, visit www.dewalt.com or call
1‑800‑4‑
DeWALT
(1-800-433-9258). This warranty does
not apply to accessories or damage caused where repairs
have been made or attempted by others. THIS LIMITED
WARRANTY IS GIVEN IN LIEU OF ALL OTHERS, INCLUDING
THE IMPLIED WARRANTY OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, AND EXCLUDES ALL
INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do
not allow limitations on how long an implied warranty lasts
or the exclusion or limitation of incidental or consequential
damages, so these limitations may not apply to you. This
warranty gives you specific legal rights and you may have
other rights which vary in certain states orprovinces.
In addition to the warranty
DeWALT
tools are covered byour:
1 YEAR FREE SERVICE
DeWALT
will maintain the tool and replace worn parts caused
by normal use, for free, any time during the first two years
afterpurchase.
2YEARS FREE SERVICE ON D
e
WALT BATTERYPACKS
DC9071, DC9091, DC9096, DC9182, DC9280, DC9360,
DCB120, DCB122, DCB124, DCB127, DCB201, DCB203BT,
DCB207,DCB361
3YEARS FREE SERVICE ON D
e
WALT BATTERYPACKS
DCB200, DCB203, DCB204, DCB204BT, DCB205, DCB205BT,
DCB206, DCB208, DCB230, DCB240, DCB606, DCB609,
DCB612, DCB615
NOTE: Battery warranty voided if the battery pack is
tampered with in any way.
DeWALT
is not responsible for any
injury caused by tampering and may prosecute warranty
fraud to the fullest extent permitted bylaw.
90DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of
your
DeWALT
Power Tool or Nailer for any reason, you can
return it within 90days from the date of purchase with a
receipt for a full refund – no questionsasked.
LATIN AMERICA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country specific warranty information contained in
the packaging, call the local company or see website for
warrantyinformation.
FREE WARNING LABEL REPLACEMENT: If your warning
labels become illegible or are missing, call 1‑800‑4‑
DeWALT
(1-800-433-9258) for a freereplacement.
Register Online
Thank you for your purchase. Register your product nowfor:
• WARRANTY SERVICE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with yourproduct.
• CONFIRMATION OF OWNERSHIP: In case of an
insurance loss, such as fire, flood or theft, your registration
of ownership will serve as your proof ofpurchase.
• FOR YOUR SAFETY: Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
SafetyAct.
• Register online at www.dewalt.com
Repairs
The charger and battery pack are notserviceable. There are
no serviceable parts inside the charger or batterypack.
WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including brush
inspection and replacement, when applicable) should
be performed by a
DeWALT
factory service center or a
DeWALT
authorized service center. Always use identical
replacementparts.
Blade Sharpening (Fig.K)
CAUTION: Keep blade sharp for best performance. A
dull blade does not cutcleanly.
CAUTION: When sharpening blade, ensure that
battery isremoved.
CAUTION: REPLACE BENT OR DAMAGED
BLADEIMMEDIATELY.
It is recommended that sharpening of blades be performed
by a factory service centre. However, blade edges may be
sharpened by using a fine tooth file
19
.
1. Run the trimmer until cutting blades
1
areoffset.
2. Be sure the lock‑off lever is engaged, the blade has
stopped, and the battery has been removed before
sharpeningblade.
3. Wear proper eye protection and gloves, and be careful
not to cutyourself.
4. Carefully file the cutting edges of the blade with a fine
tooth file. File toward the cutting edge
20
at the original
cutting angle (38 degrees from horizontal). File only the
straight cutting edges of the blades. Do not file where the
cutting edge curves into the centre of theblade.
5. Flip the trimmer over to sharpen the bottomblade.
6. Repeat steps to sharpen the opposite side of eachblade.
Loading ...
Loading ...
Loading ...