Loading ...
Loading ...
Loading ...
PARTS & ACCESSORIES
A Main Unit
B Integrated Smoke Box
C Pellet Box
D Control Panel
E Built-in Probe
F Probe Socket
G Onboard Probe storage.
Slide out to access
probe.
H Power cord and RCD
plug
I ON/O Switch
J Grill Plate
K Pellet Scoop
L Crisper Basket
M Grease Tray
N Grease Tray Liner
To order replacement or additional parts and accessories, visit ninjakitchen.co.uk
POWERING THE GRILL
1 Plug the RCD into electrical socket. Switch socket on.
2 Press RESET button on the RCD. The circle above
the RESET button should be illuminated orange. If
this isn’t the case, try a dierent socket. Note: It may
be dicult to see the orange if in direct sunlight.
3 Press the TEST button on the RCD. The circle should
now show black. This means the RCD is functioning
correctly. If pressing the TEST button does not
change the circle to black then contact customer
services.
4 After establishing if the RCD is functioning correctly
once again press RESET. The orange illumination
should re-appear. The unit can now be switched on.
NOTE: RCD Light;
ORANGE = RCD is ON ; BLACK = RCD is OFF
5 Press the on/o switch at the back of the unit to the
side of the right-hand leg. Switch is on when the side
with the line is pressed down.
6 Now turn the dial on the front of the control panel
and turn it to the desired function. The display
should illuminate to reveal times or temps. The grill is
now ready to use.
NOTE: The RESET button on the RCD will need
to be pressed every time the unit is unplugged or
the socket switched o.
EXTENSION CORD
If using an extension cord, ensure it is suitable for
use outdoors with outdoor appliances. Using the
incorrect cord could lead to the cord overheating,
melting and/or a drop in voltage. A drop in voltage
can increase preheat times and impact cooking
performance and/or cook times.
BEFORE FIRST USE - CONTINUED
Where to locate the grill
Place grill on a stable and level surface. It is
important this can support the weight and size of
the unit. The underside stays cool and so you can
place the unit on any surface. Position the unit at
least 90cm (3 feet) from walls or anything over
head due to heat and smoke output.
Use in any weather
This grill is safe to use in any weather. The main
unit is IPX4 rated and the plug is IP66. The RCD
plug provides additional protection and it is
designed to trip should there be any issue with
the circuit. When not in use we advise you cover
the unit to keep it looking it’s best. Whilst the unit
is safe it will show signs of weathering if exposed
to the elements.
1 Remove and discard any packaging material and tape from the unit. Some stickers are to be permanently
kept on the unit, ONLY remove stickers with ‘peel here’.
2 Remove all accessories from the package and read this manual carefully. Please pay particular attention to
operational instructions, warnings and important safeguards to avoid any injury or property damage.
3 Wash the grill plate and crisper basket in warm, soapy water, then rinse and dry thoroughly. The grill plate,
crisper basket and base unit are NOT dishwasher safe. NEVER clean the main unit in the dishwasher.
NOTE: The base liner underneath the bottom heating element may have some visible discoloration.
This is a result of our normal manufacturing process. The unit has not been previously used.
4 DO NOT use abrasive brushes or sponges on the cooking surfaces, as they will cause damage to the coating.
BEFORE FIRST USE
We recommend placing all accessories inside the grill and running it on GRILL, temp set to HI
for 20 minutes without adding food. This removes any residues. This is completely safe and not
detrimental to the performance of the grill.
Continue following instructions on page 5 before attempting to do this.
K
G
N
L
M
J
C
E
I (Fig. A)
H
RED LIGHT = ON
D
F
A
B
7
ninjakitchen.co.uk
6
ninjakitchen.co.uk
Loading ...
Loading ...
Loading ...