Loading ...
Loading ...
Loading ...
Beforeoperatingyournewmicrowaveovenmake
sureyoureadandunderstandthisoperation
manualcompletely.
Beforethe ovencan beused,followthese
procedures:
1.Plugintheoven.Closethedoor.Theovendisplay
willthenbeginflashing_.
2.TouchSTOP/CLEARpad.
willappear.
3.TouchTIMER/CLOCKpadtosetclock.
TO SET THE CLOCK
• Suppose you want to enter the correct time of day
12:30 (A.M. or P.M.).
CLOCK LI
ToUCh CLOCK pad. The colon (:)wil! {!ash,
Enter the correct time [ IC . _-I/J
[ /11
of day by touching the -_
numbers in sequence.
3 I T,MERI --'.-,n
C. Du
Touch CLOCK pad again_
This is a 12 hour clock. If you attempt to enter an
incorrect clock time, _ will appear in the display.
Touch STOP/CLEAR pad and re-enter the time.
• If the electrical power supply to your microwave
oven should be interrupted, the display will inter-
mittently show _ after the power is reinstated.
If this occurs during cooking, the program will be
erased. The time of day will also be erased. Simply
touch STOP/CLEAR pad and reset the clock for the
correct time of day.
STOP/CLEAR
Touch STOP/CLEAR pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
TiME COOKING
Your oven can be programmed for 99 minutes 99 sec-
onds (99.99). Always enter the seconds after the min-
utes, even if they are both zeros.
• Suppose you want to cook for 5 minutes at 100%.
S, L7L7
Enter cooking time,
START will flash.
START n- n n ]
[ __ [ .,._t. LtLt
Touch START pad. ---_
TO SET POWER LEVEL
There are eleven preset power levels.
Using lower power levels tncreases the cooking t_me
which is recommended for foods such as cheese milk
and long slow cooking of meats Consult cookbook or
rectpes for specific recommendations.
twice 90%
3 times 80%
4 times 70% Med gh
5 times 60%
Medium
7 times 40%
Vled
9 times 20%
" 10% Low
11 times 0%
• Suppose you want to defrost for 5 minutes at 30%.
,-nn
Enter defrost time: _ _
START will flash.
2 PowER
LEVEL -_ I--t
Touch POWER LEVEL
pad 8 times or hold down
until the desired Power
level appears.
[ START 5. L?L?
Touch START pad,
4 When the defrost time is Complete, a long {one
will sound and _ will appear in the display.
Loading ...
Loading ...
Loading ...