Loading ...
Loading ...
Loading ...
Page 13
Remove the plug from the socket before carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication or maintenance. There are no user serviceable
parts in your power tool. Never use water or chemical cleaners to clean your power tool. Wipe
clean with a dry cloth. Always store your power tool in a dry place. Keep the motor ventilation
slots clean. Keep all working controls free of dust. Occasionally you may see sparks through the
ventilation slots. This is normal and will not damage your power tool.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualied persons, in order to avoid a hazards and risk of injury, or damage to the tool.
WORKING TIPS FOR YOUR TOOL
MAINTENANCE
If your power tool becomes too hot, especially when used at low speed, set the speed to maxi-
mum and run it with no load for 2-3 minutes to cool the motor. Avoid prolonged usage at very low
speeds. Always keep the blade sharp.
Always ensure the workpiece is rmly held or clamped to prevent movement.
Any movement of the material may affect the quality of the cutting or sanding nish.
Start your tool before working and turn it off only after you stop working.
Do not start sanding without having the sandpaper tted.
Do not allow the sandpaper to wear away as it will damage the sanding pad. The guarantee does
not cover sanding pad wear and tear.
Use coarse grit paper to sand rough surfaces, medium grit for smooth surfaces and ne grit for
nishing surfaces. If necessary, rst make a test run on scrap material.
Excessive force will reduce the working efciency and cause motor overload.
Replacing the accessory regularly will maintain optimum working efciency.
Loading ...
Loading ...
Loading ...