Loading ...
Loading ...
Loading ...
Care and cleaning of the range.
Oven
frame
Lift-Off Upper Oven Door (onsomemodels)
To remove the door:
To replace the door:
[]_] Fullyopen the door.
[] Lift up on the hinge lock toward the
oven frame until they stop.
r_ Close the door to 45 degrees (you will
feel the door stop).The hinge lock will
contact the oven frame.
[] On both sides of the door, press down
on the release buttons on each hinge.
[_] Liftdoor up until it is clear of the hinge.
[_] Pullon hinge arms slightly to relieve
pressure on the locking tabs.
[Z-] Pushthe hinge locks down onto
the hinge.
[_ Pushthe hinges in toward the unit
so they are closed.
[_ Pullthe hinges down away from the
oven frame to the fully open position.
[_ Lift up on the hinge lockstoward
the oven frame until they stop.
r3] The hinges will releaseto the
45-degree position.The hinge locks
will contact the oven frame.
[_ Slidethe door back onto the hinges.
Hake sure the buttons pop back out.
[_ Fullyopen the door.
[_ Pushthe hinge locks down onto
the hinge.
[Z] Closethe oven door.
iiii_
Handles
Usethe rack with the two front handles
in the upper oven.
Usethe rack without the two front
handlesin the lower oven.
Oven Rocks
All oven racks may be cleaned by hand
with an abrasive cleaner or steel wool. After
cleaning, rinse the rocks with cleon water
and dry with o cleon cloth. Grog porcelain-
coated oven rocks may remain in the oven
during the self-cleaning cycle without being
damaged. The nickel-plated oven rocks
may remain in the oven during the
self-cleaning cycle, but they will losetheir
luster and become hard to slide.It will be
necessary to grease all oven rack side
edges with a light coating of vegetable oil
after cleaning them by hand or in the oven.
Thiswill help maintain the ease of sliding
the rocks in and out of the oven.
38
Loading ...
Loading ...
Loading ...