Loading ...
Loading ...
Loading ...
13
-
CARE AND MAINTENANCE
NOTE
vent it suddenly falling when removing for cleaning.
GREASE FILTERS - aluminium mesh and stainless steel
for heavy use. Use a warm detergent solution.
REMOVING LED LAMPS
MODEL GQA90SC - 6 LED spot lights
First switch off the rangehood and unplug from the socket. Wait until the lights have cooled before
attempting to remove them from the rangehood. Remove the filters and using a cloth, push down
on the lights from behind and lights will pop out.
MODEL GQA8UC - LED light bar
First switch off the rangehood and unplug from the socket. Wait until the light bar is cool before
attempting to remove it from the rangehood. Remove the filters. There is a cable with plug that runs
to the light bar, unplug the cable and then remove the 2 screws securing the light bar allowing it to
drop free from the rangehood.
MODELS GQA90TBLED and GQA120TBLED - Full LED panel
First switch off the rangehood and unplug from the socket. Hinge the LED panel down. Remove
the filters. There is a black cable with an inline plug and socket, disconnect the cable at this point.
The cable can be fed back through a hole in the bottom of the rangehood, there is a rubber seal
that is easily removed. Undo the 4 screws and remove the LED panel and hinges.
CONTACT GLEM GAS ON 1300 307 917 for replacement LED lights
SERVICING & CLEANING
It is important that the installation of the rangehood takes into account accessibility for servicing.
IF SERVICING THE RANGEHOOD REQUIRES DAMAGE TO TILES, WALLS, CEILINGS OR
FINISHES THIS WILL NOT BE COVERED UNDER WARRANTY.
We strongly recommend keeping filters clean. They are easy to wash and with regular care will
provide years of service.
Stainless steel should only be clean with a quality non abrasive cleaner. We recommend just using
a soft cloth with hot water. Detergents can cause streaking and aggressive detergents can attack
the surface finish of the stainless steel. IN COASTAL AREAS WITH HIGH LEVELS OF SALINITY IN
THE AIR ADDITIONAL CARE MUST BE GIVEN TO PROTECT ALL STAINLESS STEEL PRODUCTS
TO PREVENT DISCOLOURATION AND CORROSION.
ROOF SPACE FAN MOTOR - The roof space fan motor should be checked from time to time to
make sure it is free of debris that could obstruct airflow, and check that the ducting is remaining in
good condition.
Loading ...
Loading ...
Loading ...