Loading ...
Loading ...
Loading ...
11
REMOTE MOTOR UNIT INSTALLATION
It is recommended that the roof space motor unit be mounted in an environment that is free of
other gases and air pressure that could create blow back. The motor unit has been designed with the
other simple support framework may need to be added to provide the best installation.
Take motor unit out of the packaging. Attached the black attachment modules using 4 screws on
each side.
Attach the two rigid metal connector sleeves.
ducting. THE DUCTING MUST BE TAUT TO PREVENT NOISE. CUT TO SUIT. The supplied ducting is
Establish a suitable position in the roof space for the motor unit. Install it as close as
Using the screws provided mount the motor unit onto a suitable structure in the roof space.
Feed the duct through from the rangehood and attach to the inlet side of the motor unit. Get the
duct as taut as possible to stop noise from vibration. It is important that the duct does not rest
against the stainless steel chimney.
in the roof or wall. FIGURE 2.
Feed the power cable from the motor unit down the chimney and plug it into the
rangehood. FIGURE 4.
1.
2.
3.
4.
5.
6.
317
280
414
322
313
120
120
296
A really good tip is to use PVC or steel rigid pipe from the rangehood to the ceiling and then attach the
flexible ducting. This provide optimum performance with lowest noise levels.
Loading ...
Loading ...
Loading ...