Loading ...
Loading ...
Loading ...
25
ST
E
AM ASSISTED COOKING
for the recipe, consult the dedicated table in the
paragraphs below.steam service functions
Menu > Cleaning > Steam maintenance
Submenu
Application
Descaling
Procedure for cleaning the
steam generation circuit from
residual limestone.
Rinsing
Procedure for rinsing and
cleaning the steam generation
circuit after frequent use of
the steam functions.
Tank emptying
Procedure for removing the
residual water from the water
drawer after use of the steam
functions.
Descaling Function
Before you start:
• Turn o the oven and wait until it is cold
• Empty the water drawer (use tank empty function)
Duration of the first part: around 100 minutes
1. Select Menu/Cleaning/Descaling
2. Place the deep pan on the oven base
3. Fill the drawer with 250ml of descaling agent
4. Fill the remaining part with 700 ml of water, until
signal sound or display shows the message
5. Launch the function
6. After the first part is over, empty the deep pan and
put it back on the oven base
Duration of the second part: approx 35min
7. Fill the remaining part of the water drawer with water
to the maximum level until the signal sounds or the
display shows a message.
8. When the function ends, remove the deep pan.
When this function works, the light is o.
When descaling ends:
• Turn o the oven.
• When the oven is cold, dry the cavity with a soft
cloth.
• Leave the oven door open and wait until the cavity
is dry.
if the procedure is not completed correctly, the display
prompts to repeat the procedure.
Descaling reminder
There are two reminders which prompt you to descale the
oven. You cannot disable the descaling reminder.
Type
Description
Soft reminder
Recommends you descale the
oven
Hard reminder
Obligates you to descale the oven.
If you do not descale the oven
when the hard reminder is on, the
steam functions are disabled.
Rinsing
Before you start:
• Turn o the oven and wait until it is cold
1. Place the deep pan on the base of the oven.
2. Fill the water drawer with water to the maximum
level until the signal sounds or the display shows a
message.
3. Select: Menu / Cleaning / Rinsing.
Duration: approx 30 min
4. Turn on the function and follow the instruction on the
display.
5. When the function ends, remove the deep pan.
When this function works, the lamp is o.
Loading ...
Loading ...
Loading ...