Loading ...
Loading ...
Loading ...
-12-
7. Device Setup Instructions
Step 1: Download and install the APP on your phone / tablet.
Step 2: Locate the OBDII diagnostic port and Plug the device into
the 16-Pin Data Link Connector (DLC) of your vehicle. Make sure
the connection is good. “RED LED” always on for power
indication. “BLUE LED” flashes when plug in for paring or in
communication with ECU. When no communication, the “BLUE
LED” might be off.
Step 3: Turn ignition key to the ON position (or start up the
vehicle running at idle speed).
Step 4: Enable Bluetooth on your phone / tablet.
(On iOS devices: You will see "NEXAS" on the list of Bluetooth devices, but
DO NOT pair with it from here. Please go to the next step directly.
On Android or Windows devices: Pair with "NEXAS" in Bluetooth settings of
the devices and connect it by inputting a PIN of 1234)
Step 5: Run the APP, make the connection settings and connect.
(Please refer to the detailed instructions and Connection /
settings for each App in Part 8.)
Loading ...
Loading ...
Loading ...