Loading ...
Loading ...
Loading ...
–
10
–
Important information:
B, C, D :
For cutting applications, and to comply to current
legislation, it is necessary to replace the “grinding”
guard supplied with this machine with a “cutting”
guard (Please consult the Draper website or your
local stockist for details). High oscillation
frequency:
AB C
Grinder Spindle (M14)
E
D
A. Type 27:
Depressed Centre Grinding Wheel
B. Type 41:
Flat Cutting-off Wheel
C. Type 42:
Depressed Centre Cutting-off Wheel
D. Superabrasive Wheel
(Diamond/CBN Abrasive)
E. Wire Cup Brush
5
FIG.
6.5 FITTING GRINDING DISCS - FIGS.
6–7
Press and hold the spindle lock button (2). Loosen
the locking ange (3) anti-clockwise using the pin
spanner (9) supplied. The spindle may rotate slightly
before the spindle lock fully engages.
6
FIG.
(9)
(2)
(3)
7
FIG.
(3)
Remove the locking ange only. Clean the anges and
spindle prior to tting any accessory. If the rear ange
is removed for cleaning, ensure it locates correctly on
the spindle ats when retting and does not spin freely.
When tting the appropriate accessory please refer to
(Fig.5) for specic details on the locking ange correct
orientation as applicable.
Loading ...
Loading ...
Loading ...