Loading ...
Loading ...
Loading ...
RHAP3501 7 Revision 1.8
FOR THE FIRST TIME
Turning On the Purifier
Ensuring that all the filters are in place, press the
‘On/Standby’ button located on the control
panel
If your purifier fails to turn on, ensure that all
the filters have been correctly assembled as
shown earlier in this manual.
Auto Mode
Once the Air Purifier has warmed up, press the AI
button to enter Auto Mode.
Auto mode automatically adjusts the fan speed
according to the air quality.
Night Mode
If Air Quality is above 50μg/m3, air flow is increased to aid air
purification.
If Air Quality is below 50μg/m3, the air purifier enters low
speed / noise mode.
Timer
Set for 1/2/4/8 hours. Hold for 3 seconds to reset the sensor
of HEPA filter after replacement, HEPA filter replacement
prompt will disappear and re-timing of HEPA filter will begin.
Loading ...
Loading ...
Loading ...