Loading ...
Loading ...
Loading ...
CLEANING AND MAINTENANCE - 105914779938/B
e
5. Insert the funnel provided in the loading
drawer.
fig. 2
6. Pour the water (using a bottle or a
measuring jug) until the reservoir max. level
indicator light comes on (in the
information area on the right) to show
that the max. level has been reached
(the reservoir contains about 800 ml of
water).
fig. 3
7. At the end, remove the funnel and place the
loading drawer back in its place.
fig. 4
8. Close the door.
9. Touch the CONFIRM button to confirm
that you have finished filling the reservoir.
The appliance starts the function using the
parameters set.
Cleaning the water circuit
• During this process, the overflowing of water
inside the oven cavity is not intended as a
malfunction, rather it is part of the rinsing
procedure.
End of hydraulic circuit cleaning
10.At the end of the cleaning process, the
display indicates the request to drain water.
11.Clean and dry any residual water inside the
oven cavity.
Reservoir draining
12.Place the deep pan on the third shelf from
the bottom. Push it against the rear wall of
the oven cavity.
13. Touch the START button to start
draining the water into the jug.
The water starts to flow into the deep pan from
the drain pipe on the right side of the rear wall
of the oven cavity.
fig. 5
Use cold tap water which is not too
hard, softened water or still mineral
water.
Do not use distilled water, tap water
with a high chloride content (> 40 mg/
l), or other liquids.
Loading ...
Loading ...
Loading ...