Loading ...
Loading ...
Loading ...
CLEANING AND MAINTENANCE - 103914779938/B
e
microfibre cloth.
Descaling
Periodically the display will prompt you to
perform the boiler descaling procedure.
Reservoir filling
1. Mix 100 g of citric acid with 650 ml of
water in a jug.
2. Open the door and pull the loading drawer
out of its housing.
3. Insert the funnel provided in the loading
drawer.
4. Pour the water softener (using a bottle or a
measuring jug) until the reservoir max. level
indicator light (in the information area
on the right) shows that the max. level
has been reached .
5. At the end, remove the funnel and place the
loading drawer back in its place.
Boiler descaling function
1. Close the door
2. Descaling starts.
At the end of the descaling process the display
shows the request to drain the water softener.
Reservoir draining
1. Open the door.
2. Place the deep pan on the third shelf from
the bottom. Push it against the rear wall of
the oven cavity.
3. Touch the START button to start
draining the water softener.
The descaling solution starts to flow into the
deep pan from the drain pipe on the right side
of the rear wall of the oven cavity.
4. Wait for the end of the drain flow.
When finished, the reservoir indicator light
(in the information area on the right) and
the display indicate the end of the water
softener drain process.
5 Drain the descaling solution from the deep
pan.
Cleaning the reservoir and hydraulic circuit
Once the water softener has been drained, the
appliance starts the cleaning procedure for the
reservoir and the hydraulic circuit.
The display will show the request to fill the
reservoir with water.
1. Open the door and pull the loading drawer
out of its housing.
2. Place the deep pan on the third shelf from
the bottom. Push the tray up against the rear
wall of the oven cavity.
3. Pull the loading drawer out of its housing.
4. Insert the funnel provided in the loading
drawer.
We recommend wearing rubber gloves
for these operations.
For easier manual cleaning of parts that
are difficult to reach, we recommend
removing the door.
The presence of scale due to lack of
descaling can compromise correct
operation of the appliance in the long
term.
Descaling is a long process (more than
one hour) that requires the user to be
present in front of the appliance.
We recommend performing descaling
every time this is indicated on the
display in order to keep the boiler in
perfect operating condition.
Depending on conditions, the system
will show if the appliance can perform
standard functions or if a descaling and
cleaning process of the hydraulic circuit
is required.
Do not use lactic acid or other
descaling agents.
Take care: the descaling solution may
be still hot.
Use cold tap water which is not too
hard, softened water or still mineral
water.
Do not use distilled water, tap water
with a high chloride content (> 40 mg/
l), or other liquids.
Loading ...
Loading ...
Loading ...