WOLF STAINLESS STEEL BACKSPLASH
INSTALLATION INSTRUCTIONS
Wolf Stainless Steel Backsplash Kit
Contents:
QTY DESCRIPTION
1 Backsplash (see list)
4 #10x2''(51) Hex Head Screws
FOR MODEL NUMBERS:
30BAK (810425) 30”(762) W x
38”(965) H BACKSPLASH 30”(762)
WALL HOOD
36BAK (810426) 36”(914) W x
38”(965) H BACKSPLASH 36”(914)
WALL HOOD
42BAK (810427) 42”(1067) W x
38”(965) H BACKSPLASH 42”(1067)
WALL HOOD
48BAK (810428) 48”(1219) W x
38”(965) H BACKSPLASH 48”(1219)
WALL HOOD
54BAK (810429) 54”(1371) W x
38”(965) H BACKSPLASH 54”(1371)
WALL HOOD
60BAK (810430) 60”(1524) W x
38”(965) H BACKSPLASH 60”(1524)
WALL HOOD
66BAK (810431) 66”(1676) W x
38”(965) H BACKSPLASH 66”(1676)
WALL HOOD
NOTE: The total height of the back-
splash is 38”(965). The Wolf back-
splash is designed to be installed
under your Wolf Hood and extend
behind your Wolf Cooking appliance.
IMPORTANT NOTE: There are no
mounting holes along the top edge of
the backsplash for cosmetic reasons.
Additional support is required and a
contact adhesive must be used.
Consult your local building material
supplier or hardware store for details
on backsplash adhesive products.
Page 1 of 1 810884 / Rev A / March, 2007
INSTALLING BACKSPLASH:
1. Align top edge of backsplash
with underside of hood. Allow
maximum of 1/8”(3) clearance
between the bottom edge
of the hood and the top of
the backsplash.
2. Carefully following the contact
adhesive instructions, apply
contact adhesive to the back
side of the top edge of the back-
splash. Then make sure the top
edge of the back splash is level
and mount the backsplash to
the wall.
3. Make sure backsplash is level
with the Wolf Hood before
installing screws along
bottom edge of backsplash
(See Figure 1).
IMPORTANT NOTE: It may be neces-
sary to pull Wolf Cooking appliance
away from the wall to complete
installation of backsplash bottom
screws. As shown in figure 1.
Backsplash corners and edges are
sharp and caution should be used
when handling backsplash.
Figure 1
Top
Bottom
