MODELS • 801633 • 801634
MODELS • 801633 • 801634
99043119A
99043119A
WALL SHIELDS
INSTALLATION INSTRUCTIONS
1. Determine location for WALL SHIELD.
2. Hold wall shield in place and carefully mark
WALL through all 4 MOUNTING HOLES.
3. Determine whether wall studs or framing are
behind any of the 4 marks on the wall.
4.
If studs or framing are behind wall marks: Use
the 4 MOUNTING SCREWS to attach the wall
shield directly to studs or framing. Do not over-
tighten.
5.
If no studs or framing are behind wall marks: Drill
WALL ANCHORS directly into wall material (no
pilot hole is necessary). Then mount wall shield
with 4 mounting screws. Do not overtighten.
WALL ANCHOR
(Use only where no
wall studs or framing
are available.)
MARK WALL THROUGH
ALL 4 MOUNTING HOLES
WALL
SHIELD
MOUNTING
HOLE
MOUNTING
SCREW
WALL SHIELDS
INSTALLATION INSTRUCTIONS
1. Determine location for WALL SHIELD.
2. Hold wall shield in place and carefully mark
WALL through all 4 MOUNTING HOLES.
3. Determine whether wall studs or framing are
behind any of the 4 marks on the wall.
4.
If studs or framing are behind wall marks: Use
the 4 MOUNTING SCREWS to attach the wall
shield directly to studs or framing. Do not over-
tighten.
5.
If no studs or framing are behind wall marks: Drill
WALL ANCHORS directly into wall material (no
pilot hole is necessary). Then mount wall shield
with 4 mounting screws. Do not overtighten.
WALL ANCHOR
(Use only where no
wall studs or framing
are available.)
MARK WALL THROUGH
ALL 4 MOUNTING HOLES
WALL
SHIELD
MOUNTING
HOLE
MOUNTING
SCREW
