Loading ...
Loading ...
Loading ...
11 — English
TROUBLESHOOTING
IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICE DEALER.
PROBLEM POSSIBLE CAUSE SOLUTION
Handle not in position. Handle lock levers and/or handle
adjustment knobs are not secured.
Make sure handle lock levers and
handle adjustment knobs are in the
locked position.
Chute is difficult or impossible to turn. Chute may not be fully seated or may
be jammed.
Remove the chute and make sure it is
clear of debris. Reinstall chute making
sure it is securely locked into place.
Snow blower not starting. Battery is low in charge.
Start button is not depressed.
Charge the battery.
Hold start button and engage bail.
The motor is on but the impeller does
not turn.
The drive belt is worn or broken. Have the drive belt replaced by an
authorized service center.
After passing, the snow blower leaves
a layer of snow on the ground.
The impeller/scraper mechanism is
worn.
Have the impeller/scraper mechanism
replaced by an authorized service
center.
MAKE THE MOST OF YOUR PURCHASE!
Go to http://register.ryobitools.com and register your new tool on-line.
Your product has been fully tested prior to shipment
to ensure your complete satisfaction.
For any questions about operating or maintaining
your product, call the RYOBI Help Line!
1-800-525-2579
This product has a Five-year Limited Warranty for personal, family,
or household use (90 days for business or commercial use).
For warranty details, visit www.ryobitools.com
or call (toll free) 1-800-525-2579.
Loading ...
Loading ...
Loading ...