Loading ...
Loading ...
Loading ...
Before You Call For Service
Problem
PossibleCause WhattoDo
Ovenwill not
start
Floor of the oven is
warm, even when
the oven has not
been used
A fuse in your home
may be blown or the
circuit breaker tripped.
Power surge.
Plug not fully inserted
into wall outlet.
Door not securely dosed.
The cooktop light is
located below the oven
floor. When the light
is on. the heat it
produces may make the
oven floor get warm.
• Replace fllse or reset circuit breaker.
• Unplug the microwave oven, tllen plug
it back in.
• Make sure tlle 3-prong plug on the
oven is filly inserted into wall outlet.
• Open tlle door and close securely.
• Tllis is normal.
"LOC" appears The control has been • Press and hold ('&EAR/OFF tbr
on display locked, about 3 seconds to unlock the control.
Vent fan will not
turn off
The vent fan
automatically turns on
to cool internal parts
while the microwave
is on.
The probe has not been
completely inserted into
the oven wall outlet.
The probe is defective.
Probe has been
forgotten or not
inserted properly.
"BAD PROBE"
appearsondisplay
"PLEASEINSERT
PROBE"appears
ondisplay
"SENSORERROR"
appearsondisplay
When using a Sensor
feature, the door was
opened before steam
could be detected.
Steam was not detected
in maximum amount
of time.
The vent tim cannot be turned off
while the microwave is operating.
Tllis is normal. ¥\hit tor the microwave
to turn off and tlle Jan will either go
off automatically or you will need to
turn it off by pressing tile Vent Fan
pad alter tile microwave is otL
Insert tile probe properly into tile
oven wall outlet.
• Replace tile probe.
• Insert tile probe properly into tile
oven wall outlet.
Do not ()pen door until steam is
sensed and time is sllown counting
down on display.
• Use Time Cook to lleat tor more time.
36
Loading ...
Loading ...
Loading ...