Z-Creeper Seat
Model
C-2036DG
Printed in China
C-2036DG-M0_012019
Capacity
300 lbs.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or property damage.
!
Operating Instructions & Parts Manual
SFA Companies, Inc.
10939 N. Pomona Ave.
Kansas City, MO 64153
Phone (888)332-6419, Fax (816)891-6599
U.S. Patent No. 6,969,077
WARNING:
Cancer and Reproductive Harm.
www.P65
Warnings.ca.gov
SPECIFICATIONS
Model Rated Capacity Seat Size Creeper Size Weight
C-2036DG 300 lbs. 12-5/8” x 11” 36” 13.45 lbs.
WARNING: Do not use this device for any purpose other than that for which it is expressly intended.
Figure 1 - Model C-2036DG Components
Head C
ushion
Head Frame
Middle Frame
Rear Frame
Folding components can present pinch and crush hazards during use of this product. Exercise caution when performing
adjustments and always be alert and sober while assembling and using this equipment.
!
SAFETY AND GENERAL INFORMATION
For your safety, read, understand, and follow the
information provided with and on this folding creeper.
The owner and operator shall have an understanding
of this product and safe operating procedures before
attempting to use. The owner and operator shall be
aware that use of this product may require special skills
and knowledge. Instructions and safety information shall
be conveyed in the operator’s native language before
use of this product is authorized. Make certain that the
operator thoroughly understands the inherent dangers
associated with the use and misuse of the product. If
any doubt exists as to the safe and proper use of this
product, remove from service immediately.
Inspect before each use. Do not use if there are
broken, bent, cracked or damaged parts (including
labels). Any folding creeper that appears damaged in
any way, or operates abnormally shall be removed from
service immediately. If the folding creeper has been
subjected to a shock load (a load dropped suddenly,
unexpectedly upon it), immediately discontinue use until
it has been inspected by a Pro-Lift authorized service
center. It is recommended that an annual inspection
be done by qualied personnel. Labels and Operator’s
Manuals are available from manufacturer.
PRODUCT DESCRIPTION
This device is designed to be folded in a ‘Z’ shape for
use as a mechanics seat or unfolded for use as a me-
chanics creeper. It is intended to be used to support
and move, along a smooth and level surface, rated
capacity loads consisting of a single person weighing
no more than 300 lbs. for the purpose of performing
automotive maintenance or service. This device is not
intended, designed or engineered to be used for any
other purpose.
Rated Capacity: One person (includes any tools,
equipment, personal items) weighing 300lbs. or less.
CAUTION
!
2
PREPARATION
Before assembling your Folding Creeper, make sure all
parts are present. If any part is missing or damaged, do not
attempt to assemble or use the product. Contact Pro-Lift
customer service for replacement parts.
Package Contents: 1 Head Frame Section, 1 Middle Frame
Section, 1 Rear Frame Section, 4 Hex Bolts, 8 Washers, 4
Hex Nuts, 6 Casters, 4 Caster Fasteners.
Figure 4 - Adjusting Creeper to seat conguration
Figure 5 - Adjusting Seat to Creeper conguration
2 Flip Head Frame forward until horizontal.
3. Unlock the spring loaded Lock Pin by pulling out until
disengaged, then reverse steps 1, 2 to convert Creeper
Seat into Creeper.
Figure 2 - Creeper Frame assembly
Figure 3 - Attaching Creeper Casters
ASSEMBLY INSTRUCTIONS
1. Place Creeper Sections face down, arranged as shown in
Fig. 2 (note Middle Section orientation).
• Read, understand, and follow all instructions before operating this device.
• Do not exceed rated capacity. Rated capacity is 300 lbs. (includes user, tools, equipment and personal items).
• Sit down gently. Avoid shock loads caused by jumping or falling onto seat.
• Do not stand on seat.
• Beware of pinch and crush hazards when folding and unfolding.
• Keep out of the reach of children! This device is not appropriate for children’s use.
• Use only on hard, level surface capable of supporting the load.
2. Connect Creeper Sections using Hex Bolts, Washers and
Nuts. Tighten Nuts rmly, but not enough to bind Creeper
adjustment.
3. Insert Lock Pin into hole in frame side. Check for proper
operation.
4. Using the included open-end wrench, attach two Casters
to the threaded holes in the Head Frame section. Use a
5mm hex key to fasten the remaining four Casters to the
Creeper Frame. Insert the threaded Fasteners from the
top and the Casters from the bottom, then tighten with
hex key.
OPERATING INSTRUCTIONS
1. Unlock the spring loaded Lock Pin by pulling out until
disengaged, at the same time rotate the Head Frame and
Middle Frame upward and back towards the Rear Frame
section until the Lock Pin can engage the Creeper Seat
Locking Sleeve (Fig. 4). Ensure Lock Pin is fully engaged.
WARNING
!
3
MAINTENANCE
Wipe clean as needed. Use mild upholstery cleaner (not caustic) to clean seat as needed.
CAUTION: Do not lubricate casters
!
SFA Companies, Inc.
10939 N. Pomona Ave.
Kansas City, MO 64153
Phone (888)332-6419, Fax (816)891-6599
1
2
2
REPLACEMENT PARTS LIST
Item Part No. Description Qty
1 B2036-2 Caster Assy 6
2 C-2036D-2 Hardware Kit 1
ONE YEAR LIMITED WARRANTY
For a period of one (1) year from date of purchase, SFA Companies, Inc. will repair or replace, at its
option, without charge, any of its products which fails due to a defect in material or workmanship under normal
usage. This limited warranty is a consumer's exclusive remedy.
Performance of any obligation under this warranty may be obtained by returning the warranted product,
freight prepaid, to SFA Companies, Inc. Warranty Service Department, 10939 N. Pomona Ave., Kansas City, MO
64153.
Except where such limitations and exclusions are specically prohibited by applicable law, (1)
THE CONSUMER'S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF
DEFECTIVE PRODUCTS AS DESCRIBED ABOVE. (2) SFA Companies, Inc. SHALL NOT BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL DAMAGE OR LOSS WHATSOEVER. (3) ANY IMPLIED WARRANTIES,
INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE, SHALL BE LIMITED TO ONE YEAR, OTHERWISE THE REPAIR, REPLACEMENT
OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF
THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. (4)
ANY MODIFICATION, ALTERATION, ABUSE, UNAUTHORIZED SERVICE OR ORNAMENTAL DESIGN VOIDS
THIS WARRANTY AND IS NOT COVERED BY THIS WARRANTY.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may
not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so
the above limitation or exclusion may not apply to you. This warranty gives you specic legal rights, and you may
also have other rights, which vary from state to state.
4
