Loading ...
Loading ...
Loading ...
Pan Position
[0° to 355°]
Rotation Position
[0° to 355°]
Tilt Position
[0° to 75°]
Tilt Adjusting Screw
Figure 2-10 3-Axis Adjustment
8. Install the bubble back and tighten screws to finish
the installation.
Figure 2-11 Install the Bubble Back
2.4 Ceiling Mounting of Type IV Camera
Before you start:
The ceiling mounting and the wall mounting are similar.
Following takes ceiling mounting as an example.
Steps:
1. Align the snap joint, and then insert the screw driver
into the snap joint.
Align the
Snap Joint
Anticlockwise
Figure 2-12 Disassemble the Camera
2. Pry the bubble by anticlockwise rotate the screw
driver and take off the black liner.
Figure 2-13 Remove the Bubble and the Black Liner
3. Paste the drill template (supplied) to the place
where you want to install the camera.
Loading ...
Loading ...
Loading ...