Loading ...
Loading ...
Loading ...
2.3 Ceiling Mounting of Type III Camera
Before you start:
The ceiling mounting and the wall mounting are similar.
Following takes ceiling mounting as an example.
Steps:
1. Paste the drill template (supplied) to the place
where you want to install the camera.
2. Drill the screw holes and cable hole (optional) on
the ceiling according to the drill template.
Drill Template
Hole A: for cables routed through the ceiling
screw hole 1: for Mounting Base
1
1
1
A
120°
Figure 2-7 Drill Template
Note:
Cable hole is required, when adopting the ceiling
outlet to route cables.
3. Loosen the set screws to remove the bubble.
Figure 2-8 Remove the Bubble
Note:
You do not have to loosen those screws entirely.
Remove the bubble with care. The bubble is
connected to the mounting base with a safety
rope.
4. Route the cables through the cable hole, or the side
opening.
5. Attach the mounting base to the ceiling with
supplied screws.
Figure 2-9 Attach the Mounting Base
6. Connect the corresponding cables, such as power
cord, and video cable.
7. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, loosen the tilt adjusting screw to adjust the
angle.
Loading ...
Loading ...
Loading ...