Loading ...
Loading ...
Loading ...
INSTALLATION STEP 2
Install the Header Bracket
You can attach the headerbracket either to the wall above the
garagedoor, or to the ceiling. Follow the instructions which will
work bestfor your particular requirements. Do not install the
header bracketover drywall. If installing into masonry, use
concreteanchors(not provided).
WALLHEADERBRACKETINSTALLATION
• Centerthe bracket on the vertical centerline with the bottom
edge of the bracket on the horizontal line as shown (with the
arrow pointing toward the ceiling).
• Mark the vertical set of bracket holes. Drill 3/16" pilot holes and
fasten the bracket securely to a structural support with the
hardware provided.
HARDWARESHOWN ACTUAL SIZE
Lag Screw
5/16"-9xl -5/8"
Header
Wall Mount
Optional
Mounting Holes
- Wa
2sSX_ipt°Ulal_
1
Horizontal /
Line /
7 •
Highest Point of
Garage Door Travel
I Vertical
Centerline
l of Garage Door
Lag Screws
5/16"x9x 1-5/8"
Spring
Garage
-- Door-
Vertical
Centerline
of Garage Door
CEILINGHEADERBRACKETINSTALLATION
• Extend the vertical centerline onto the ceiling as shown.
• Center the bracket on the vertical mark, no more than
6" (15 cm) from the wall. Make sure the arrow is pointing away
from the wall. The bracket can be mounted flush against the
ceiling when clearanceis minimal.
• Mark the side holes. Drill 3/16" pilot holes and fasten bracket
securely to a structural support with the hardware provided.
Ceiling Mounting Holes
Header s
Bracket
6" (15 cm) Maximurr
Door
Spring
- Finished Ceiling -
Vertical Centerline
of Garage Door
-- Lag Screws
5/16"x9x1-5/8"
-- Header Wall --
13
Loading ...
Loading ...
Loading ...