Goldair GHL255W Classic Heat Light Vent

Operating Instructions - Page 3

For GHL255W. Also, The document are for others Goldair models: GHL455W

PDF File Manual, 10 pages, Read Online | Download pdf file

GHL255W photo
Loading ...
Loading ...
Components
1. Heat Light Vent Unit
2. 9W R63 LED Globe
3. 275W Heat Lamps
4. 3m Ducting
5. Exterior Vent
6. Switch Plate
General Notes
This Goldair product is designed only to be used as a fixed Heat/Light/Vent product,
installed into the ceiling. If the product is installed or used for any other purpose the
warranty will be void.
Installation of this product must be completed by a registered electrician.
Handle product with care, remove the bulbs during installation.
The unit must be located and installed in accordance with the latest edition of
AS/NZS 3000 and any local regulation information for mounting in damp areas
(please consult your local electrician for information).
The unit can be installed in any room that requires direct radiant heating and
circulated air flow such as bathrooms, ensuites, laundries, etc.
The unit must be installed in flat ceilings with a minimum height of 2.1 metres from
the floor.
Do not install the unit directly above shower or bath recesses or enclosures.
Joints, beams and rafters must not be notched to install the appliance.
The unit must not be installed in a position where water may splash onto the heat
lamps.
The appliance shall, under no circumstances, be covered with insulating material or
similar material.
Loading ...
Loading ...
Loading ...