Loading ...
Loading ...
Loading ...
– 9
Loosen all the four screws and remove
the bearing lid.
Remove the roller brushes (large) and
intake brushes (small) and replace
them (pay attention to the hexagonal in-
take of the brushes!).
Also check simultaneously the combs
and the guide rails and replace or clean
them as required.
Remove the combs and replace them.
To do this, slide the inlet combs on the
narrow rails and the outlet combs on the
wider rails.
Pull out all dirt particles from the suction
nozzles; do not push them in.
Loosen the fastening screws of the
holder for the guide rails.
Dismantle the guide rails.
Insert the guide rails in reverse se-
quence. Ensure that they sit properly.
Replacing the roller brushes and the
intake brushes
Replacing the combs
Cleaning the suction nozzles
Replacing the guide rails
23EN
Loading ...
Loading ...
Loading ...