Loading ...
Loading ...
Loading ...
Installation Instructions
INSTALLING THE REFRIGERATOR(cont.)
[] LEVEL THE REFRIGERATOR
The leveling legs have 2 purposes:
1) Leveling legs adjust so the refrigerator is
firmlg positioned on the floor and does not
wobble.
2) Leveling legs serve as a stabilizing broke
to hold the refrigerator securelg in position
during operation and cleaning. The leveling
legs also prevent the refrigerator from
tipping.
[] Remove the grille bg removing the two Phillips
head screws.
[] Turn the leveling legs clockwise to raise
the refrigerator, counterclockwise to lower it.
-& CAUTION: To avoid possible
personal injurg or property damage,
the leveling legs must be firmlg touching
the floor.
[] Replace the base grille bg inserting the two
Phillips head screws.
[] SET THE CONTROLS
Set the controls to the recommended setting.
5 5
47
[.Eco. .oEoCONT.OLSE...Nosl
0 'FIS RECOMMENDED 37 'F IS RECOMMENDED
REMOVE PACKAGING,
START ICEMAKER
(icemeker models)
A) Remove all tape, foam and protective
packing from shelves and drawers.
B) Remove the tie downs from the freezer
baskets.
C) Place half width basket onto drawer
slides. See About the freezer section for
instructions.
Set the icemaker power switch to the I Ion)
position. The icemaker will not begin to operate
until it reaches its operating temperature of
15°F (-9°C) or below. It will then begin operation
automaticallg. It will take 2-3 dags to fill the
ice bin.
NOTE:
In lower water pressure conditions, the water
valve mag turn on up to 5 times to deliver
enough water to the icemaken
2O
Loading ...
Loading ...
Loading ...