Owner’s Manual and Installation - Page 19

For SSL27RGRBBS. Also, The document are for others GE - General Electric models: SSL21*, SSL23*, SSL25*, SSL27*, SSL29*

Loading ...
Loading ...
Loading ...
Replacing the light bulbs.
Setting the controls to 0 (off) does not remove power to the light circuit.
Yourlight shield will look like
one of the following.
Tabs
OR
Pocket
Refrigerator Compartment--Upper Light
0 UnI)lug the refl'igerator.
@ The bulbs are located at the top of the
conq)artment, inside the light shield.
On some models, a screw at the fl'ont of
the light shield will have to be removed.
On other models, the screw is located
in the pocket located at the back ot the
light shield.
0 To remoxe the light shield, on some
models, press in on the tabs on the
sides of the shield and slide fin'ward
and out. On other models,just slide
the shield forward and out.
@ _Mter replacing the bull) with an
appliance bulb ot the same or lower
w'attage, replace the light shield and
sci'e_:s (on SOlne inodels). When
replacing the light shield, make sure
that the tabs at the back of the shield
fit into the slots at the back of the light
shield housing.
Plug the reli_igerator back in.
Refrigerator Compartment--Lower Light
This//ghtis/ocatodabove the top drawer.
Unplug the refiigerato_:
@ Remove the convertible meat drawer
control knob by pulling straight out.
0 lift the light shield up and pull it out.
O _Mter replacing the bull) with an appliance
bulb of the same or lower wattage, replace
the shield and the knob.
Plug the " back in.
0 ' refl'igerator
Freezer Compartment
UnI)lug the reliigerato_:
@ Remove the sheffjust aboxe the light
shield. (The shelfxdll be easier to remoxe
if it is emptied fi_t.) On some models,
a screw at the top of the light shield will
need to be removed.
( ) o" " "
0 To rein xe the light shmld, press m on the
sides, and lift up and out.
Replace the bull) with an appliance
bulb of the same or lower wattage,
and reinstall the light shield. When
reinstalling the light shield, make sure
the top tabs snap securely into place.
Replace the screw (on some models).
Reinstall the shelf and )hu,
I
0 ..... the
refrigerator back in.
Dispenser
UnI_lug the refiigerato_:
@ The bulb is located on the dispenser under
the control panel. Remove the light bulb
b) turning it counterclockwise.
Replace the bulb with a bulb of the same
size _lll(1 watta(*e
0 Plug the refrigerator back in.
19
Loading ...
Loading ...
Loading ...