Loading ...
Loading ...
Loading ...
23
monitors is reset to “Not Ready” or “Not Complete” status. Do
not erase the codes before the system has been checked
completely.
This function is performed with key on engine off (KOEO). Do
not start the engine.
Select [Erase Trouble Code] and press [ ] in [DIAGNOSTIC
MENU]. The screen will display the interface as shown below:
Press [ ] or [ ] to return to the [DIAGNOSTIC MENU]
Notes:
(1) Before performing this function. Make sure to retrieve and
record the trouble codes.
(2) After clearing, you should retrieve trouble codes once again
or turn ignition on and retrieve codes again. If there are still
Loading ...
Loading ...
Loading ...