Loading ...
Loading ...
Loading ...
GB
26
Clean and Maintenance
Clean filter
WARNING:
• The filter should be cleaned every three months. If there is much dust in the operation
environment, clean frequency can be increased.
• After removing the filter, do not touch fins to avoid injury.
• Do not use fire or hair dryer to dry the filter to avoid deformation or fire hazard.
1 OPEN PANEL
Pull out the panel to a certain
angle as shown in the fig.
2 REMOVE FILTER
Remove the filter as indicated
in the fig.
3 CLEAN FILTER
• Use dust catcher or water to
clean the filter.
• When the filter is very dirty,
use the water (below 45 ºC ) to
clean it, and then put it in a
shady and cool place to dry.
4 INSTALL FILTER
Install the filter and then close
the panel cover tightly.
Loading ...
Loading ...
Loading ...