Bissell 17857 User Guide

Loading ...

www.BISSELL.ca

Cleaning Area Rugs

Before each use, hold the solution spray

trigger for 10 seconds to prime the

system with cleaning solution. LED lights

illuminate when holding the trigger.

NOTE: When solution is flowing, you will

see bubbles forming at the edges of the

brush roll window.

To clean, hold the solution

spray trigger to apply

solution on both forward

and backward passes.

To dry area rugs faster,

release the trigger and

clean a second pass

without dispensing

solution.

NOTE: Before cleaning area rugs, test an inconspicuous area of the rug for

colorfastness. Also, please check manufacturer’s tag before cleaning area rugs for

any specialized cleaning instructions. Not for use on silk or delicate area rugs.

NOTE: The RUG button dispenses twice the solution of the HARD FLOOR button

to help with area rug cleaning.

ATTENTION

Do not over wet carpet. Be careful not to run over loose objects or edges of area rugs.

Stalling the brush may result in premature belt failure.

Select cleaning mode:

To start cleaning your rugs, turn

the machine ON pressing the

RUG button. Once the setting is

selected, the dry vacuum will turn

on. To turn OFF, press the RUG

setting a second time.

Recline the body of the

machine backward to start

the brush roll spinning.

To stop the brush roll

spinning, you will need to

stand the machine upright.

Plug machine into a

properly grounded

outlet.

TIP: For the most thorough clean, make 4 wet passes and 4 dry passes using

overlapping strokes over each area you clean on your rugs.

Loading ...

Bissell 17857 CrossWave® All-in-One Multi-Surface Wet Dry Vac