Bissell 17857 User Guide

Loading ...

www.BISSELL.ca

Cleaning Your Hard Floors

Select cleaning mode:

To start cleaning your hard floors,

turn the machine ON pressing the

HARD FLOOR button. Once the

setting is selected, the dry vacuum

will turn on. To turn OFF, press the

HARD FLOOR setting a second

time.

Before each use, hold the solution

spray trigger for 10 seconds to prime

the system with cleaning solution.

LED lights illuminate when holding the

trigger.

NOTE: When solution is flowing, you

will see bubbles forming at the edges

of the brush roll window.

To clean, hold the solution

spray trigger to apply

solution on both forward and

backward passes.

To dry hard floors faster,

release the trigger and

clean a second pass

without dispensing

solution.

TIP: When cleaning excessively dirty or muddy hard ﬂoors or if your brush

roll looks dirty, use the Easy Clean Storage Tray to rinse your brush roll before

cleaning your area rugs.

Recline the body of the

machine backward to start

the brush roll spinning.

To stop the brush roll

spinning, you will need to

stand the machine upright.

Plug machine into a

properly grounded

outlet.

TIP: For overly challenging and stuck-on messes on your hard ﬂoors, activate

the RUG mode and hold your CrossWave™ over the mess. Using short passes

while holding the trigger allows the multi-surface brush to go to work.

Loading ...

Bissell 17857 CrossWave® All-in-One Multi-Surface Wet Dry Vac