Loading ...
Loading ...
Loading ...
Kärcher TRS-SSG • Operators • 9.801-330.0-K
15
PRESSURE WASHER
OPERATOR’S MAN U AL
98013300-3
PRESSURE WASHER ASSEMBLY INSTRUCTIONS
STEP 1: Attach the high pres sure
hose to the spray gun by threading
onto spray gun inlet.
STEP 2: Remove shipping cap
and install oil dipstick (Depending
on type of shipping, dipstick may
already be installed). Check pump
oil lev el by us ing dip stick or observe
oil level in oil win dow (if equipped).
Use SAE 10W-40 non detergent oil.
Spray
Gun
High Pressure
Hose
98013300-5
BATTERY INSTALLATION
Due to Federal Reg u la tions con cern ing ship ment of
cor ro sive chem i cals, batteries are gel fi lled.
Red Ca ble is at-
tached to bat tery
(+) pos i tive ter mi-
nal, black cable
is con nect ed to
bat tery (-) neg a tive
terminal.
SHIELD
EYES
EXPLOSIVE
GASES
CAN CAUSE
BLINDNESS OR INJURY
NO
SPARKS
FLAMES
SMOKING
SULFURIC
ACID
CAN CAUSE
BLINDNESS OR
SEVERE BURNS
FLUSH EYES
IMMEDIATELY
WITH WATER
GET
MEDICAL
HELP
FAST
KEEP OUT OF THE REACH OF CHILDREN. DO NOT TIP. KEEP VENT CAPS TIGHT AND LEVEL.
DANGER
/
POISON
98013300-27
Black - Negative
Terminal
Red + Positive
Terminal
STEP 5: Release the coupler collar
and push the nozzle until the collar
clicks. Pull the nozzle to make sure
it is seated properly.
98013300-26
Pressure
Nozzle
Pressure
Nozzle
STEP 4: Pull the spring-loaded col-
lar of the wand coupler collar back
to in sert your choice of pressure
noz zle.
CAUTION: Never replace
noz zles with out engaging the
safe ty latch on the spray gun
trig ger.
98013300-25
Wand Coupler
Collar
STEP 3: Connect high pressure
hose to discharge nipple by slid-
ing quick coupler collar back. (If
de ter gent is to be ap plied, insert
a de ter gent injector.) Insert quick
coupler onto dis charge nipple and
se cure by pushing quick coupler
collar for ward.
98013300-24
Detergent
Injector
(Option)
High
Pressure Hose
Discharge
Nipple
Coupler
Collar
Loading ...
Loading ...
Loading ...