Loading ...
Loading ...
Loading ...
2222
Britax Child Safety, Inc.
Table of Contents
In some cases, the vehicle head restraint
can prevent the child seat head restraint
from being raised high enough to
properly adjust the harness for the fit
of your child. DO NOT force the child
seat head restraint past the vehicle head
restraint. Doing so could cause the child
seat not to perform as intended. If the
location of the vehicle head restraint interferes with the
child seat head restraint, raise or remove the vehicle head
restraint. If the vehicle head restraint cannot be removed,
move the child seat to the upright position or try a dierent
seating location.
WARNING!
Harness Mode
3 in
Booster Mode
Overhang
Harness Mode
It is important that the base of the child seat rests
completely at on the vehicle seat with no side overhang.
It is permissible to allow up to 3 in. (7.6 cm) of the base to
hang over the front edge of the vehicle seat. If the vehicle
seat does not allow enough of the child seat base to make
contact, adjust the recline angle to a more upright position.
Not doing so could cause the child seat to not perform as
intended.
Booster Mode
Overhang is not allowed in booster mode. In booster mode,
the base of the child seat must t completely on the vehicle
seat.
Adjusting Buckle Position
Removing the Buckle
1. Unbuckle the harness by
pressing the release button
and pulling the tongues.
Loading ...
Loading ...
Loading ...