Loading ...
Loading ...
Loading ...
ASSEMBLY
Your new tractor has been assembled at the factory with exception ofthose parts left unassembled for shipping purposes.
To ensure safe and proper operation of yourtractor all parts and hardware you assemble must be tightened securely,. Use
the correct tools as necessary to insure proper tightness,
TOOLS REQUIRED FOR ASSEMBLY
A socket wrench set will make assembly easier_ Standard
wrench sizes are listed,
(2) 7/16" wrenches Pliers
(1) 9/16" wrench Tire pressure gauge
(1) 3/4" Socket w/drive ratchet Phillips Screwdriver
Utility knife
When right or left hand is mentioned in this manual, it
means when you are in the operating position (seated
beh{nd the steering wheel),
TO REMOVE TRACTOR FROM CARTON
UNPACK CARTON
• Remove all accessible loose parts and parts cartons
from carton (See page 6).
o Cut, from top to bottom, along lines on al! four corners
of carton, and fay panels flat.
. Remove mower and packing materials.
= Check for any additional loose parts or cartons and
remove.
STEERING__
_ TEERING WHEEL
INSERT
.- HEX LOCKNUT
FLAT WASHER
STEERING
WHEE I"
I I / / /
/ t 1/ /
_'_._ zI
FIG, 1
BEFORE ROLLING TRACTOR OFF SKiD
ATTACH STEERING WHEEL (See Fig. 1)
o Remove locknut and large flat washer from steering
shaft.
• Position front wheels of the tractor so they are pointing
straight forward.
• Slide the steering sleeve over the steering shaft,
. Position steering wheel so cross bars are horizontal
(left to right) and slide onto adapter.
• Secure steering wheel to steering shaft with iocknut
and large flat washer previously removed° Tighten
securely.
,, Snap steering wheel insert into center of steering
wheel,
• Remove protective materials from tractor hood and
gdll,
IMPORTANT: CHECK FOR AND REMOVE ANY STAPLES
IN SKID THAT MAY PUNCTURE TIRES WHERE TRACTOR
IS TO ROLL OFF SKID,
TO ROLL TRACTOR OFF SKID (See Operation
section for location and function of controls)
• Press lift lever plunger and raise attachment lift lever to
its highest position_
o Release parking brake by depressing clutch/brake
pedal°
= Place freewheel control in freewheeling position to
disengage transmission (See "TO TRANSPORT" in
the Operation section of this manual).
• Roll tractor backwards off skid.
7
Loading ...
Loading ...
Loading ...