ninjakitchen.com
MEGA KITCHEN SYSTEM®
BL770
Series
OWNER’S GUIDE
2 ninjakitchen.com
CONTENTS
THANK YOU
for purchasing the Ninja® Mega Kitchen System®
Important Safety Instructions � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �4
Parts � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �8
Before First Use � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �9
Using the Blender Pitcher � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10
Using the Nutri Ninja® Cup � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 12
Using the Food Processor Bowl � � � � � � � � � � � � � � � � � � � � � � � � � � � � 14
Speed Settings & Uses � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 16
Care & Maintenance � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 17
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Storing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Resetting the Motor Thermostat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Ordering Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Troubleshooting Guide � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 18
Warranty � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 19
PLEASE READ CAREFULLY AND
KEEP FOR FUTURE REFERENCE�
TECHNICAL SPECIFICATIONS
Voltage: 120V~, 60Hz
Power: 1500 Watts
Pitcher Capacity: 72 oz. (9 cups, 2.15 L)
MAX Liquid
Capacity: 64 oz. (8 cups, 1.9 L)
Bowl Capacity: 64 oz. (8 cups, 1.8 L)
Nutri Ninja® Cup
Capacity: 16 oz. (2 cups, 470ml)
TIP: You can find the model and serial
numbers on the QR code label on the
back of the unit by the power cord.
RECORD THIS INFORMATION
Model Number: ��������������������
Serial Number: ���������������������
Date of Purchase: �������������������
(Keep receipt)
Store of Purchase: ������������������
REGISTER YOUR PURCHASE
registeryourninja.com
Scan QR code using mobile device
3ninjakitchen.com
2 ninjakitchen.com
CONTENTS
THANK YOU
for purchasing the Ninja® Mega Kitchen System®
Important Safety Instructions � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �4
Parts � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �8
Before First Use � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �9
Using the Blender Pitcher � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10
Using the Nutri Ninja® Cup � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 12
Using the Food Processor Bowl � � � � � � � � � � � � � � � � � � � � � � � � � � � � 14
Speed Settings & Uses � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 16
Care & Maintenance � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 17
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Storing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Resetting the Motor Thermostat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Ordering Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Troubleshooting Guide � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 18
Warranty � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 19
PLEASE READ CAREFULLY AND
KEEP FOR FUTURE REFERENCE�
TECHNICAL SPECIFICATIONS
Voltage: 120V~, 60Hz
Power: 1500 Watts
Pitcher Capacity: 72 oz. (9 cups, 2.15 L)
MAX Liquid
Capacity: 64 oz. (8 cups, 1.9 L)
Bowl Capacity: 64 oz. (8 cups, 1.8 L)
Nutri Ninja® Cup
Capacity: 16 oz. (2 cups, 470ml)
TIP: You can find the model and serial
numbers on the QR code label on the
back of the unit by the power cord.
RECORD THIS INFORMATION
Model Number: ��������������������
Serial Number: ���������������������
Date of Purchase: �������������������
(Keep receipt)
Store of Purchase: ������������������
REGISTER YOUR PURCHASE
registeryourninja.com
Scan QR code using mobile device
3ninjakitchen.com
5ninjakitchen.com
4 ninjakitchen.com
Read and review instructions for operation and use�
Indicates the presence of a hazard that can cause personal injury,
death or substantial property damage if the warning included with this
symbol is ignored�
For indoor and household use only�
When using electrical appliances, basic safety precautions should always be
followed, including the following:
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electrical shock or property damage,
basic safety precautions must always be followed, including the following
numbered warnings and subsequent instructions� Do not use appliance for
other than intended use�
1 Read all instructions prior to using the
appliance and its accessories.
2 Carefully observe and follow all warnings
and instructions. This unit contains
electrical connections and moving parts
that potentially present risk to the user.
3 Take your time and exercise care during
unpacking and appliance setup. This
appliance contains sharp, loose blades
that can cause injury if mishandled.
4 Upon completion of processing, ensure
the blade assembly is removed BEFORE
emptying container’s contents. Remove
the blade assembly by carefully grasping
the top of the shaft and lifting it from
the container. Failure to remove the
blade assembly before emptying the
container results in a risk of laceration.
5 If using the pitcher’s pour spout, hold
the cover in place on the container or
ensure lid lock is engaged when pouring
to avoid risk of injury.
6 This product is provided with a Stacked
Blade Assembly and a Chopping Blade
Assembly. ALWAYS exercise care when
handling blade assemblies. The blade
assemblies are sharp and are NOT locked
in place in their containers. The blade
assemblies are designed to be removable
to facilitate cleaning and replacement if
needed. ONLY grasp the blade assembly
by the top of the shaft. Failure to use care
when handling the blade assemblies will
result in a risk of laceration.
7 Blades are sharp. Handle carefully.
8 DO NOT fill containers past the
MAX FILL or MAX LIQUID lines.
9 ALWAYS exercise care when handling the
Nutri Ninja® Blade Assembly. The blades
are sharp. ONLY grasp the Nutri Ninja
Blade Assembly by the outer perimeter
of the blade assembly base. Failure to use
care when handling the blade assembly
will result in a risk of laceration.
10 DO NOT blend hot liquids. Doing so may
result in pressure buildup and steam
exposure that can pose a risk of the user
being burned.
11 Turn the appliance OFF, then unplug the
appliance from the outlet when not in
use, before assembling or disassembling
parts, and before cleaning. To unplug,
grasp the plug by the body and pull
from the outlet. NEVER unplug by
grasping and pulling the flexible cord.
12 Before use, wash all parts that may
contact food. Follow washing instructions
covered in this instruction manual.
13 Before each use, inspect blade
assemblies for damage. If a blade is
bent or damage is suspected, contact
SharkNinja to arrange for replacement.
14 DO NOT use this appliance outdoors. It is
designed for indoor household use only.
15 This appliance has a polarized plug (one
prong is wider than the other). To reduce
the risk of electric shock, this plug will
fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician. DO NOT
modify the plug in any way.
16
DO NOT operate any appliance with
a damaged cord or plug, or after the
appliance malfunctions or is dropped or
damaged in any manner. This appliance
has no user-serviceable parts. If damaged,
contact SharkNinja for servicing.
17 This appliance has important markings
on the plug blade. The entire supply
cord is not suitable for replacement. If
damaged, please contact SharkNinja
for service.
18 Extension cords should NOT be used
with this appliance.
19 To protect against the risk of electric
shock, DO NOT submerge the appliance
or allow the power cord to contact any
form of liquid.
20 DO NOT allow the cord to hang over
the edges of tables or counters. The
cord may become snagged and pull the
appliance o the work surface.
5ninjakitchen.com
4 ninjakitchen.com
Read and review instructions for operation and use�
Indicates the presence of a hazard that can cause personal injury,
death or substantial property damage if the warning included with this
symbol is ignored�
For indoor and household use only�
When using electrical appliances, basic safety precautions should always be
followed, including the following:
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electrical shock or property damage,
basic safety precautions must always be followed, including the following
numbered warnings and subsequent instructions� Do not use appliance for
other than intended use�
1 Read all instructions prior to using the
appliance and its accessories.
2 Carefully observe and follow all warnings
and instructions. This unit contains
electrical connections and moving parts
that potentially present risk to the user.
3 Take your time and exercise care during
unpacking and appliance setup. This
appliance contains sharp, loose blades
that can cause injury if mishandled.
4 Upon completion of processing, ensure
the blade assembly is removed BEFORE
emptying container’s contents. Remove
the blade assembly by carefully grasping
the top of the shaft and lifting it from
the container. Failure to remove the
blade assembly before emptying the
container results in a risk of laceration.
5 If using the pitcher’s pour spout, hold
the cover in place on the container or
ensure lid lock is engaged when pouring
to avoid risk of injury.
6 This product is provided with a Stacked
Blade Assembly and a Chopping Blade
Assembly. ALWAYS exercise care when
handling blade assemblies. The blade
assemblies are sharp and are NOT locked
in place in their containers. The blade
assemblies are designed to be removable
to facilitate cleaning and replacement if
needed. ONLY grasp the blade assembly
by the top of the shaft. Failure to use care
when handling the blade assemblies will
result in a risk of laceration.
7 Blades are sharp. Handle carefully.
8 DO NOT fill containers past the
MAX FILL or MAX LIQUID lines.
9 ALWAYS exercise care when handling the
Nutri Ninja® Blade Assembly. The blades
are sharp. ONLY grasp the Nutri Ninja
Blade Assembly by the outer perimeter
of the blade assembly base. Failure to use
care when handling the blade assembly
will result in a risk of laceration.
10 DO NOT blend hot liquids. Doing so may
result in pressure buildup and steam
exposure that can pose a risk of the user
being burned.
11 Turn the appliance OFF, then unplug the
appliance from the outlet when not in
use, before assembling or disassembling
parts, and before cleaning. To unplug,
grasp the plug by the body and pull
from the outlet. NEVER unplug by
grasping and pulling the flexible cord.
12 Before use, wash all parts that may
contact food. Follow washing instructions
covered in this instruction manual.
13 Before each use, inspect blade
assemblies for damage. If a blade is
bent or damage is suspected, contact
SharkNinja to arrange for replacement.
14 DO NOT use this appliance outdoors. It is
designed for indoor household use only.
15 This appliance has a polarized plug (one
prong is wider than the other). To reduce
the risk of electric shock, this plug will
fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician. DO NOT
modify the plug in any way.
16
DO NOT operate any appliance with
a damaged cord or plug, or after the
appliance malfunctions or is dropped or
damaged in any manner. This appliance
has no user-serviceable parts. If damaged,
contact SharkNinja for servicing.
17 This appliance has important markings
on the plug blade. The entire supply
cord is not suitable for replacement. If
damaged, please contact SharkNinja
for service.
18 Extension cords should NOT be used
with this appliance.
19 To protect against the risk of electric
shock, DO NOT submerge the appliance
or allow the power cord to contact any
form of liquid.
20 DO NOT allow the cord to hang over
the edges of tables or counters. The
cord may become snagged and pull the
appliance o the work surface.
7ninjakitchen.com
6 ninjakitchen. com
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
21 DO NOT allow the unit or the cord to
contact hot surfaces, including stoves
and other heating appliances.
22 ALWAYS use the appliance on a dry
and level surface.
23 DO NOT allow children to operate
this appliance or use as a toy. Close
supervision is necessary when any
appliance is used near children.
24 This appliance is NOT intended to be
used by people with reduced physical,
sensory, or mental capabilities, or lack
of experience and knowledge, unless
they have been given supervision
or instruction concerning use of the
appliance by a person responsible for
their safety.
25 ONLY use attachments and accessories
that are provided with the product or
are recommended by SharkNinja. The
use of attachments, including canning jars,
not recommended or sold by SharkNinja
may cause fire, electric shock, or injury.
26 NEVER place a blade assembly on the
motor base without it first being attached
to its corresponding container (pitcher or
cup) with the lid also in place.
27 Keep hands, hair, and clothing out of the
container when loading and operating.
28 During operation and handling of
the appliance, avoid contact with
moving parts.
29 DO NOT operate the appliance with
an empty container.
30 DO NOT microwave any containers or
accessories provided with the appliance.
31 NEVER leave the appliance unattended
while in use.
32 DO NOT process dry ingredients with
the Single-Serve Blending Cup and Nutri
Ninja® Blade Assembly, the pitcher and
Stacked Blade Assembly, or the processor
bowl and Chopping Blade Assembly.
33 To reduce the risk of injury, never place
Chopping Blade Assembly or discs on
base without first putting bowl properly
in place.
34 DO NOT perform grinding operations with
the Single-Serve Blending Cup and Nutri
Ninja Blade Assembly, the pitcher and
Stacked Blade Assembly, or the processor
bowl and Chopping Blade Assembly.
35 NEVER operate the appliance without
lids and caps in place. DO NOT attempt
to defeat the interlock mechanism.
Ensure the container and lid are properly
installed before operation.
36 Before operation, ensure all utensils are
removed from containers. Failure to
remove utensils can cause containers to
shatter and potentially result in personal
injury and property damage.
37 Keep hands and utensils out of
containers while chopping to reduce the
risk of severe personal injury or damage
to the blender/food chopper. A scraper
may be used ONLY when the blender
or processor is not running. When using
the processor, always use food pusher to
add food. NEVER add food by hand.
38 If you find unmixed ingredients sticking to
the sides of the cup, stop the appliance,
remove the blade assembly, and use a
scraper to dislodge ingredients.
39 DO NOT open the pitcher’s pour spout
cap while blender is operating.
40 If you find unmixed ingredients sticking
to the sides of the pitcher, stop the
appliance, remove the lid, and use a
spatula to dislodge ingredients. NEVER
insert your hands into the pitcher, as
you may contact one of the blades and
experience a laceration.
41 DO NOT attempt to remove the
container or lid from the motor base
while the blade assembly is still spinning.
Allow the appliance to come to a
complete stop before removing lids and
containers.
42 If the appliance overheats, a thermal switch
will activate and temporarily disable the
motor. To reset, unplug the appliance
and allow it to cool for approximately
30 minutes before using again.
43 DO NOT expose the containers and
accessories to extreme temperature
changes. They may experience damage.
44 Remove the Nutri Ninja® Blade Assembly
from the Single-Serve Cup upon
completion of blending. DO NOT store
ingredients before or after blending
them in the cup with the blade assembly
attached. Some foods may contain
active ingredients or release gases that
will expand if left in a sealed container,
resulting in excessive pressure buildup
that can pose a risk of injury. For
ingredient storage in the cup, use only
Spout Lid to cover.
45 The maximum wattage rating for this
appliance is based on the configuration
of the Nutri Ninja Blade Assembly and
Single-Serve Cup. Other configurations
may draw less power or current.
46 DO NOT submerge the motor base or
control panel in water or other liquids.
DO NOT spray motor base or control
panel with any liquid.
47 DO NOT attempt to sharpen blades.
48 Turn o the appliance and unplug the
motor base before cleaning.
49 Take inventory of all contents to ensure
you have all parts needed to properly
and safely operate your appliance.
50 Unit is intended to create a dough ball.
It is NOT intended to continuously
knead. After dough ball forms, additional
kneading should be done by hand
on a work surface. If the unit moves
excessively on the work surface, remove
the dough ball and knead by hand.
7ninjakitchen.com
6 ninjakitchen. com
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
21 DO NOT allow the unit or the cord to
contact hot surfaces, including stoves
and other heating appliances.
22 ALWAYS use the appliance on a dry
and level surface.
23 DO NOT allow children to operate
this appliance or use as a toy. Close
supervision is necessary when any
appliance is used near children.
24 This appliance is NOT intended to be
used by people with reduced physical,
sensory, or mental capabilities, or lack
of experience and knowledge, unless
they have been given supervision
or instruction concerning use of the
appliance by a person responsible for
their safety.
25 ONLY use attachments and accessories
that are provided with the product or
are recommended by SharkNinja. The
use of attachments, including canning jars,
not recommended or sold by SharkNinja
may cause fire, electric shock, or injury.
26 NEVER place a blade assembly on the
motor base without it first being attached
to its corresponding container (pitcher or
cup) with the lid also in place.
27 Keep hands, hair, and clothing out of the
container when loading and operating.
28 During operation and handling of
the appliance, avoid contact with
moving parts.
29 DO NOT operate the appliance with
an empty container.
30 DO NOT microwave any containers or
accessories provided with the appliance.
31 NEVER leave the appliance unattended
while in use.
32 DO NOT process dry ingredients with
the Single-Serve Blending Cup and Nutri
Ninja® Blade Assembly, the pitcher and
Stacked Blade Assembly, or the processor
bowl and Chopping Blade Assembly.
33 To reduce the risk of injury, never place
Chopping Blade Assembly or discs on
base without first putting bowl properly
in place.
34 DO NOT perform grinding operations with
the Single-Serve Blending Cup and Nutri
Ninja Blade Assembly, the pitcher and
Stacked Blade Assembly, or the processor
bowl and Chopping Blade Assembly.
35 NEVER operate the appliance without
lids and caps in place. DO NOT attempt
to defeat the interlock mechanism.
Ensure the container and lid are properly
installed before operation.
36 Before operation, ensure all utensils are
removed from containers. Failure to
remove utensils can cause containers to
shatter and potentially result in personal
injury and property damage.
37 Keep hands and utensils out of
containers while chopping to reduce the
risk of severe personal injury or damage
to the blender/food chopper. A scraper
may be used ONLY when the blender
or processor is not running. When using
the processor, always use food pusher to
add food. NEVER add food by hand.
38 If you find unmixed ingredients sticking to
the sides of the cup, stop the appliance,
remove the blade assembly, and use a
scraper to dislodge ingredients.
39 DO NOT open the pitcher’s pour spout
cap while blender is operating.
40 If you find unmixed ingredients sticking
to the sides of the pitcher, stop the
appliance, remove the lid, and use a
spatula to dislodge ingredients. NEVER
insert your hands into the pitcher, as
you may contact one of the blades and
experience a laceration.
41 DO NOT attempt to remove the
container or lid from the motor base
while the blade assembly is still spinning.
Allow the appliance to come to a
complete stop before removing lids and
containers.
42 If the appliance overheats, a thermal switch
will activate and temporarily disable the
motor. To reset, unplug the appliance
and allow it to cool for approximately
30 minutes before using again.
43 DO NOT expose the containers and
accessories to extreme temperature
changes. They may experience damage.
44 Remove the Nutri Ninja® Blade Assembly
from the Single-Serve Cup upon
completion of blending. DO NOT store
ingredients before or after blending
them in the cup with the blade assembly
attached. Some foods may contain
active ingredients or release gases that
will expand if left in a sealed container,
resulting in excessive pressure buildup
that can pose a risk of injury. For
ingredient storage in the cup, use only
Spout Lid to cover.
45 The maximum wattage rating for this
appliance is based on the configuration
of the Nutri Ninja Blade Assembly and
Single-Serve Cup. Other configurations
may draw less power or current.
46 DO NOT submerge the motor base or
control panel in water or other liquids.
DO NOT spray motor base or control
panel with any liquid.
47 DO NOT attempt to sharpen blades.
48 Turn o the appliance and unplug the
motor base before cleaning.
49 Take inventory of all contents to ensure
you have all parts needed to properly
and safely operate your appliance.
50 Unit is intended to create a dough ball.
It is NOT intended to continuously
knead. After dough ball forms, additional
kneading should be done by hand
on a work surface. If the unit moves
excessively on the work surface, remove
the dough ball and knead by hand.
9ninjakitchen.com
8 ninjakitchen.com
PARTS
PARTS
A Pitcher Lid with Locking Handle
B 72 oz.* Blender Pitcher
C Motor Base
(attached power cord not shown)
D Stacked Blade Assembly (pitcher)
E To-Go Lid
F Nutri Ninja® Blade Assembly
G 16 oz. Nutri Ninja Cup
H Bowl Lid with Locking Handle
I 64 oz. Food Processor Bowl
J Dough Blade Assembly (bowl)
K Chopping Blade Assembly (bowl)
*64 oz. max liquid capacity.
There are a variety of accessories that are
compatible with this blenderseries.
To purchase more accessories and find
great recipes, visit ninjakitchen.com.
NOTE: The top flap of your box shows
the select accessories that are included
with your model.
NOTE: Blade Assemblies are not
interchangeable.
1 Remove all packaging materials from the
unit. Exercise care when unpacking blade
assemblies, as the blades are sharp.
2 The Chopping Blade Assembly and
Stacked Blade Assembly are NOT
locked in place in their containers.
Handle the Chopping Blade Assembly
and Stacked Blade Assembly by
grasping the top of the shaft.
3 Handle the bade assemblies by grasping
around the perimeter of the blade
assembly base.
4 Wash containers, lids, and blade
assemblies in warm, soapy, water using
a dishwashing utensil with a handle to
avoid direct contact with the blades.
Exercise care when handling blade
assemblies, as the blades are sharp.
5 Thoroughly rinse and air-dry all parts.
6 Wipe motor base with a soft cloth.
Allow it to dry completely before using.
BEFORE FIRST USE
IMPORTANT: Review all warnings
on pages 4–7 before proceeding.
DID YOU KNOW?
• You can take your drinks on the go using
the spout lid.
NOTE: All attachments are BPA free
and dishwasher safe. It is recommended
that the containers, lids, and blade
assemblies be placed on the top
rack of the dishwasher. Ensure blade
assemblies and lids are removed
from the containers before placing in
the dishwasher. Exercise care when
handling blade assemblies.
A
C
E
I
J
K
F
G
B
D
H
NOTE: Number of cups and lids vary
by model.
9ninjakitchen.com
8 ninjakitchen.com
PARTS
PARTS
A Pitcher Lid with Locking Handle
B 72 oz.* Blender Pitcher
C Motor Base
(attached power cord not shown)
D Stacked Blade Assembly (pitcher)
E To-Go Lid
F Nutri Ninja® Blade Assembly
G 16 oz. Nutri Ninja Cup
H Bowl Lid with Locking Handle
I 64 oz. Food Processor Bowl
J Dough Blade Assembly (bowl)
K Chopping Blade Assembly (bowl)
*64 oz. max liquid capacity.
There are a variety of accessories that are
compatible with this blenderseries.
To purchase more accessories and find
great recipes, visit ninjakitchen.com.
NOTE: The top flap of your box shows
the select accessories that are included
with your model.
NOTE: Blade Assemblies are not
interchangeable.
1 Remove all packaging materials from the
unit. Exercise care when unpacking blade
assemblies, as the blades are sharp.
2 The Chopping Blade Assembly and
Stacked Blade Assembly are NOT
locked in place in their containers.
Handle the Chopping Blade Assembly
and Stacked Blade Assembly by
grasping the top of the shaft.
3 Handle the bade assemblies by grasping
around the perimeter of the blade
assembly base.
4 Wash containers, lids, and blade
assemblies in warm, soapy, water using
a dishwashing utensil with a handle to
avoid direct contact with the blades.
Exercise care when handling blade
assemblies, as the blades are sharp.
5 Thoroughly rinse and air-dry all parts.
6 Wipe motor base with a soft cloth.
Allow it to dry completely before using.
BEFORE FIRST USE
IMPORTANT: Review all warnings
on pages 4–7 before proceeding.
DID YOU KNOW?
• You can take your drinks on the go using
the spout lid.
NOTE: All attachments are BPA free
and dishwasher safe. It is recommended
that the containers, lids, and blade
assemblies be placed on the top
rack of the dishwasher. Ensure blade
assemblies and lids are removed
from the containers before placing in
the dishwasher. Exercise care when
handling blade assemblies.
A
C
E
I
J
K
F
G
B
D
H
NOTE: Number of cups and lids vary
by model.
11ninjakitchen.com
10 n injakitchen.com
1 Place the motor base on a clean, dry, level
surface such as a counter or table top.
2 Align and lower the Pitcher onto the
motor base. Handle should be aligned
slightly to the right of the “LOCK”
symbol on the motor base.
USING THE BLENDER PITCHER
3 Rotate the blender pitcher clockwise
until it clicks in place. As the pitcher
rotates, it will lower and the safety tabs
on the bottom of the pitcher will slide
under the safety tabs on the top of the
motor base.
4 The pitcher can be placed on the motor
base two ways; the handle can be on
the front right corner or the front left
corner.
5 Holding the Stacked Blade Assembly
by the top of the shaft, place it onto the
drive gear inside the pitcher. Ensure that
the Stacked Blade Assembly is seated
properly and is standing upright.
6 Add the ingredients to the pitcher,
making sure that they do not exceed the
highest measured marking line on the
side of the pitcher.
7 Plug the power cord into the electrical
outlet and press the power button (
).
IMPORTANT: Review all warnings
on pages 4–7 before proceeding.
NOTE: DO NOT add ingredients before
completing installation of the Stacked
Blade Assembly.
NOTE:
If the Stacked Blade Assembly is
not fully seated, you will not be able to
install and lock the lid.
8 Holding the lid by the handle in the
upright position, place it on top of the
pitcher aligning the arrow ( ) located
on the lid with the arrow ( ) located on
the pitcher’s handle. Press the handle
down until you hear a click.
IMPORTANT: As a safety feature, the
power button ( ) will flash and the
motor will not work if the pitcher and
lid are not installed correctly. When the
pitcher and lid are installed properly, the
power button ( ) will be solid, indicating
that the appliance is ready for use.
NOTE: The Stacked Blade Assembly will
fit loosely on the drive gear.
TIP: It’s best to add the liquid ingredients
first and then the dry ingredients.
9 Select the speed that best suits your
needs.
10 When you have reached your desired
consistency, stop the appliance by
pressing same button again or select
the power button ( ) and wait for the
attachment to stop turning.
11 To remove the lid, press the release
button on the lid, pull the lid handle up
to a 90° angle and lift the lid o. Turn
the pitcher counter clockwise and then
lift o the base.
12 For thicker consistencies, first remove
the lid by pressing the release button
and pulling the lid handle up to a 90
degree angle to lift lid o the pitcher.
Then, carefully remove the Stacked
Blade Assembly by the top of the shaft.
Place Stacked Blade Assembly away
from the work area to avoid accidental
contact. Finally, empty contents from
the pitcher.
13 Make sure that the unit is unplugged
when not in use.
14
To release the motor base from the counter
or table top, place your hands underneath
both sides of the motor base and gently
pull the unit up and towards you.
11ninjakitchen.com
10 n injakitchen.com
1 Place the motor base on a clean, dry, level
surface such as a counter or table top.
2 Align and lower the Pitcher onto the
motor base. Handle should be aligned
slightly to the right of the “LOCK”
symbol on the motor base.
USING THE BLENDER PITCHER
3 Rotate the blender pitcher clockwise
until it clicks in place. As the pitcher
rotates, it will lower and the safety tabs
on the bottom of the pitcher will slide
under the safety tabs on the top of the
motor base.
4 The pitcher can be placed on the motor
base two ways; the handle can be on
the front right corner or the front left
corner.
5 Holding the Stacked Blade Assembly
by the top of the shaft, place it onto the
drive gear inside the pitcher. Ensure that
the Stacked Blade Assembly is seated
properly and is standing upright.
6 Add the ingredients to the pitcher,
making sure that they do not exceed the
highest measured marking line on the
side of the pitcher.
7 Plug the power cord into the electrical
outlet and press the power button (
).
IMPORTANT: Review all warnings
on pages 4–7 before proceeding.
NOTE: DO NOT add ingredients before
completing installation of the Stacked
Blade Assembly.
NOTE:
If the Stacked Blade Assembly is
not fully seated, you will not be able to
install and lock the lid.
8 Holding the lid by the handle in the
upright position, place it on top of the
pitcher aligning the arrow ( ) located
on the lid with the arrow ( ) located on
the pitcher’s handle. Press the handle
down until you hear a click.
IMPORTANT: As a safety feature, the
power button ( ) will flash and the
motor will not work if the pitcher and
lid are not installed correctly. When the
pitcher and lid are installed properly, the
power button ( ) will be solid, indicating
that the appliance is ready for use.
NOTE: The Stacked Blade Assembly will
fit loosely on the drive gear.
TIP: It’s best to add the liquid ingredients
first and then the dry ingredients.
9 Select the speed that best suits your
needs.
10 When you have reached your desired
consistency, stop the appliance by
pressing same button again or select
the power button ( ) and wait for the
attachment to stop turning.
11 To remove the lid, press the release
button on the lid, pull the lid handle up
to a 90° angle and lift the lid o. Turn
the pitcher counter clockwise and then
lift o the base.
12 For thicker consistencies, first remove
the lid by pressing the release button
and pulling the lid handle up to a 90
degree angle to lift lid o the pitcher.
Then, carefully remove the Stacked
Blade Assembly by the top of the shaft.
Place Stacked Blade Assembly away
from the work area to avoid accidental
contact. Finally, empty contents from
the pitcher.
13 Make sure that the unit is unplugged
when not in use.
14
To release the motor base from the counter
or table top, place your hands underneath
both sides of the motor base and gently
pull the unit up and towards you.
13ninjakitchen.com
12 ninjakitchen.com
1 Place the motor base on a clean, dry, level
surface such as a counter or table top.
2 Add ingredients to the Nutri Ninja cup.
3 Place the Nutri Ninja Blade Assembly
onto the cup and screw it tightly until
you have a good seal.
4 Turn the Nutri Ninja cup upside down
and place it onto the motor base,
aligning the tabs on the cup with the
motor base. Turn the Nutri Ninja cup
clockwise to lock into place. You will
hear a click when the lock is engaged.
Turn the power button on, the single
serve button will illuminate.
5 Press down on the Single Serve button
in short intervals to activate.
IMPORTANT: Review all warnings on
pages 4–7 before proceeding.
TIP: For best results, use short PULSES.
Practice makes perfect.
USING THE NUTRI NINJA® CUP
6 Once you have reached your desired
consistency, turn the power button
o. Turn the Nutri Ninja cup counter-
clockwise and pull straight up to remove.
7 Turn the cup upright and remove the
Nutri Ninja Blade Assembly by twisting
the blade assembly counter-clockwise.
8 Do not store blended contents with the
Nutri Ninja Blade Assembly attached.
9 Place the To-Go drinking lid onto the
Nutri Ninja® cup, twist to seal and enjoy!
10 Be sure to store the Nutri Ninja Blade
Assembly attached to an empty cup
when not in use.
11 Make sure that the motor base is
unplugged when not in use.
12 To release the motor base from the
counter or table top, place your hands
underneath both sides of the motor
base and gently pull the unit up and
towards you.
NOTE: DO NOT overfill. To avoid
spilling, do not add ingredients past
the MAX fill line.
13ninjakitchen.com
12 ninjakitchen.com
1 Place the motor base on a clean, dry, level
surface such as a counter or table top.
2 Add ingredients to the Nutri Ninja cup.
3 Place the Nutri Ninja Blade Assembly
onto the cup and screw it tightly until
you have a good seal.
4 Turn the Nutri Ninja cup upside down
and place it onto the motor base,
aligning the tabs on the cup with the
motor base. Turn the Nutri Ninja cup
clockwise to lock into place. You will
hear a click when the lock is engaged.
Turn the power button on, the single
serve button will illuminate.
5 Press down on the Single Serve button
in short intervals to activate.
IMPORTANT: Review all warnings on
pages 4–7 before proceeding.
TIP: For best results, use short PULSES.
Practice makes perfect.
USING THE NUTRI NINJA® CUP
6 Once you have reached your desired
consistency, turn the power button
o. Turn the Nutri Ninja cup counter-
clockwise and pull straight up to remove.
7 Turn the cup upright and remove the
Nutri Ninja Blade Assembly by twisting
the blade assembly counter-clockwise.
8 Do not store blended contents with the
Nutri Ninja Blade Assembly attached.
9 Place the To-Go drinking lid onto the
Nutri Ninja® cup, twist to seal and enjoy!
10 Be sure to store the Nutri Ninja Blade
Assembly attached to an empty cup
when not in use.
11 Make sure that the motor base is
unplugged when not in use.
12 To release the motor base from the
counter or table top, place your hands
underneath both sides of the motor
base and gently pull the unit up and
towards you.
NOTE: DO NOT overfill. To avoid
spilling, do not add ingredients past
the MAX fill line.
15ninjakitchen.com
14 ninjakitchen.com
2 Align and lower the bowl onto the motor
base. Handle should be aligned slightly
to the right of the LOCK symbol on the
motor base.
15ninjakitchen.com
IMPORTANT: As a safety feature, the
power button ( ) will flash and the
motor will not work if the bowl and lid
are not installed correctly. When the
bowl and lid are installed properly, the
power button ( ) will be solid, indicating
that the appliance is ready for use.
IMPORTANT: Review all warnings on
pages 4–7 before proceeding.
NOTE: Please follow the same instructions
to install the Dough Blade Assembly.
USING THE FOOD PROCESSOR BOWL
1 Place the motor base on a clean, dry, level
surface such as a counter or table top.
3 Rotate the bowl clockwise to lock into
place. You will hear a click when the lock
is engaged.
4 The bowl can be placed on the motor
base two ways; the handle can be on the
front right corner or the front left corner.
NOTE: The 64 oz. bowl is not intended
for blending drinks. DO NOT overfill.
NOTE: To add liquids during processing,
open the drizzle hole on the top of the lid
and pour the liquid slowly into the mixture.
NOTE: The Chopping and Dough
Blade Assemblies will fit loosely on
the drive gear.
5 Holding the desired Blade Assembly by
the top of the shaft, place it onto the
drive gear inside the bowl. Ensure that
the Blade Assembly is seated properly
and is standing upright.
6 Add the ingredients to the bowl, making
sure that they do not exceed the highest
measured marking line on the side of
the bowl.
7 Holding the lid by the handle in the
upright position, place it on top of the
bowl aligning the arrow (
) located on
the lid with the arrow ( ) located on the
bowl’s handle. Press the handle down
until you hear a click.
8 Plug the power cord into the electrical
outlet and press the power button (
).
Select the speed that best suits your
needs. Pulse ingredients for even chopping
by pressing down in short intervals.
7 When you have reached your desired
consistency, stop the appliance by
pressing the power button ( ) and wait
for the Chopping Blade Assembly to
stop turning.
NOTE: Please refer to Speed Settings
& Uses chart for suggested uses and
speeds.
8 To remove the lid, press the release
button on the lid and pull the lid handle
up to a 90° angle.
9 Turn the bowl counter-clockwise and lift
it to remove it from the motor base.
10 To release the motor base from the
counter or table top, place your hands
underneath both sides of the motor
base and gently pull the unit up and
towards you.
15ninjakitchen.com
14 ninjakitchen.com
2 Align and lower the bowl onto the motor
base. Handle should be aligned slightly
to the right of the LOCK symbol on the
motor base.
15ninjakitchen.com
IMPORTANT: As a safety feature, the
power button ( ) will flash and the
motor will not work if the bowl and lid
are not installed correctly. When the
bowl and lid are installed properly, the
power button ( ) will be solid, indicating
that the appliance is ready for use.
IMPORTANT: Review all warnings on
pages 4–7 before proceeding.
NOTE: Please follow the same instructions
to install the Dough Blade Assembly.
USING THE FOOD PROCESSOR BOWL
1 Place the motor base on a clean, dry, level
surface such as a counter or table top.
3 Rotate the bowl clockwise to lock into
place. You will hear a click when the lock
is engaged.
4 The bowl can be placed on the motor
base two ways; the handle can be on the
front right corner or the front left corner.
NOTE: The 64 oz. bowl is not intended
for blending drinks. DO NOT overfill.
NOTE: To add liquids during processing,
open the drizzle hole on the top of the lid
and pour the liquid slowly into the mixture.
NOTE: The Chopping and Dough
Blade Assemblies will fit loosely on
the drive gear.
5 Holding the desired Blade Assembly by
the top of the shaft, place it onto the
drive gear inside the bowl. Ensure that
the Blade Assembly is seated properly
and is standing upright.
6 Add the ingredients to the bowl, making
sure that they do not exceed the highest
measured marking line on the side of
the bowl.
7 Holding the lid by the handle in the
upright position, place it on top of the
bowl aligning the arrow (
) located on
the lid with the arrow ( ) located on the
bowl’s handle. Press the handle down
until you hear a click.
8 Plug the power cord into the electrical
outlet and press the power button (
).
Select the speed that best suits your
needs. Pulse ingredients for even chopping
by pressing down in short intervals.
7 When you have reached your desired
consistency, stop the appliance by
pressing the power button ( ) and wait
for the Chopping Blade Assembly to
stop turning.
NOTE: Please refer to Speed Settings
& Uses chart for suggested uses and
speeds.
8 To remove the lid, press the release
button on the lid and pull the lid handle
up to a 90° angle.
9 Turn the bowl counter-clockwise and lift
it to remove it from the motor base.
10 To release the motor base from the
counter or table top, place your hands
underneath both sides of the motor
base and gently pull the unit up and
towards you.
17ninjakitchen.com
16 ninjakitchen.com
CARE & MAINTENANCE
CLEANING
Separate all parts. Wash all containers in
warm, soapy water with a soft cloth.
• Hand-Washing
Wash blade assemblies in warm, soapy
water using a dishwashing utensil with
a handle to avoid direct contact with
the blades. Exercise care when handling
blade assemblies as the blades are sharp.
Thoroughly rinse and air-dry all parts.
• Dishwasher
All attachments are dishwasher safe. It is
recommended that the lids, containers,
and blade assemblies be placed on the
top rack of the dishwasher ON LY. Ensure
the blade assemblies are removed from
their containers before placing in the
dishwasher. Exercise care when handling
blade assemblies.
• Motor Base
Turn o the unit and unplug the motor
base before cleaning. Wipe motor base
with a clean, damp cloth.
DO NOT use abrasive cloths, pads, or
brushes to clean the base.
STORING
Wrap the power cord around the cord
wrap on the back of the motor base.
Store the unit upright and store all blade
assemblies inside or attached to their
respective containers with their lids locked
in place.
DO NOT store blended or unblended
ingredients in the Single-Serve Cup with
the Nutri Ninja® Blade Assembly attached.
DO NOT stack items on top of the
containers. Store any remaining
attachments alongside the unit or in a
cabinet where they will not be damaged
or create a hazard.
RESETTING THE MOTOR
This unit features a unique safety system
that prevents damage to the motor and
drive system should you inadvertently
overload the it. If the unit is overloaded,
the motor will be temporarily disabled.
Should this occur, follow the reset
procedure below.
1 Unplug the unit from the electrical outlet.
2 Allow the unit to cool for approximately
15 minutes.
3 Remove the container’s lid and blade
assembly. Empty the container and
ensure no ingredients are jamming the
blade assembly.
IMPORTANT: Ensure that maximum
capacities are not exceeded. This is the
most typical cause of appliance overload.
If your unit needs servicing, please call
Customer Service at 1-877-646-5288.
So we may better assist you, please
register your product online at
registeryourninja.com and have the
product on hand when you call.
ORDERING REPLACEMENT PARTS
To order additional parts and attachments,
visit ninjaaccessories.com.
SPEED SETTINGS & USES
FUNCTION CONTAINER ATTACHMENT
SPEED
BUTTON
TYPE OF FOOD
Nutri Ninja®
Blending
Nutri Ninja Cup
Nutri Ninja Blade
Assembly
Single Serve
Smoothies
Frappes
Milk Shakes
Mincing Nutri Ninja Cup
Nutri Ninja Blade
Assembly
Single Serve
Onion
Garlic
Herbs
Kneading Bowl
Dough Blade
Assembly
1
Bread dough
Pie dough
Pizza dough
Pretzel dough
Dough Mixing Bowl
Dough Blade
Assembly
1 Cookie dough
Processing
Pitcher/Bowl
Nutri Ninja Cup
Stacked Blade
Assembly
Nutri Ninja Blade
Assembly
2
Pulse
Single Serve
Pâtés
Stewed fruits
Dips
Apple sauce
Spreads
Soups*
Baby food
Emulsifying Bowl
Chopping Blade
Assembly
2
Salad Dressings
Dips
Sauces*
Grinding Bowl
Chopping Blade
Assembly
2 Meat
Grating
Bowl
Nutri Ninja Cup
Chopping Blade
Assembly
Nutri Ninja Blade
Assembly
3 or Pulse
Single Serve
Grated cheese
Bread crumbs
Spices
Chopping
Bowl
Nutri Ninja®
Cup
Pitcher
Chopping Blade
Assembly
Nutri Ninja Blade
Assembly
Stacked Blade
Assembly
Pulse
Single Serve
3
Salsa
Vegetables
Nuts
Mixing Bowl
Dough Blade
Assembly
1
Light cake mixes
Batters
Ice Crushing
Pitcher
Nutri Ninja Cup
Stacked Blade
Assembly
Nutri Ninja Blade
Assembly
3
Single Serve
Ice
Pureeing
Pitcher
Nutri Ninja Cup
Stacked Blade
Assembly
Nutri Ninja Blade
Assembly
3
Single Serve
Smoothies
Smooth soups
Milkshakes
* When blending sauces and soups, make sure they’re cooled to room temperature first. Ninja® containers
are not intended for hot blending.
17ninjakitchen.com
16 ninjakitchen.com
CARE & MAINTENANCE
CLEANING
Separate all parts. Wash all containers in
warm, soapy water with a soft cloth.
• Hand-Washing
Wash blade assemblies in warm, soapy
water using a dishwashing utensil with
a handle to avoid direct contact with
the blades. Exercise care when handling
blade assemblies as the blades are sharp.
Thoroughly rinse and air-dry all parts.
• Dishwasher
All attachments are dishwasher safe. It is
recommended that the lids, containers,
and blade assemblies be placed on the
top rack of the dishwasher ON LY. Ensure
the blade assemblies are removed from
their containers before placing in the
dishwasher. Exercise care when handling
blade assemblies.
• Motor Base
Turn o the unit and unplug the motor
base before cleaning. Wipe motor base
with a clean, damp cloth.
DO NOT use abrasive cloths, pads, or
brushes to clean the base.
STORING
Wrap the power cord around the cord
wrap on the back of the motor base.
Store the unit upright and store all blade
assemblies inside or attached to their
respective containers with their lids locked
in place.
DO NOT store blended or unblended
ingredients in the Single-Serve Cup with
the Nutri Ninja® Blade Assembly attached.
DO NOT stack items on top of the
containers. Store any remaining
attachments alongside the unit or in a
cabinet where they will not be damaged
or create a hazard.
RESETTING THE MOTOR
This unit features a unique safety system
that prevents damage to the motor and
drive system should you inadvertently
overload the it. If the unit is overloaded,
the motor will be temporarily disabled.
Should this occur, follow the reset
procedure below.
1 Unplug the unit from the electrical outlet.
2 Allow the unit to cool for approximately
15 minutes.
3 Remove the container’s lid and blade
assembly. Empty the container and
ensure no ingredients are jamming the
blade assembly.
IMPORTANT: Ensure that maximum
capacities are not exceeded. This is the
most typical cause of appliance overload.
If your unit needs servicing, please call
Customer Service at 1-877-646-5288.
So we may better assist you, please
register your product online at
registeryourninja.com and have the
product on hand when you call.
ORDERING REPLACEMENT PARTS
To order additional parts and attachments,
visit ninjaaccessories.com.
SPEED SETTINGS & USES
FUNCTION CONTAINER ATTACHMENT
SPEED
BUTTON
TYPE OF FOOD
Nutri Ninja®
Blending
Nutri Ninja Cup
Nutri Ninja Blade
Assembly
Single Serve
Smoothies
Frappes
Milk Shakes
Mincing Nutri Ninja Cup
Nutri Ninja Blade
Assembly
Single Serve
Onion
Garlic
Herbs
Kneading Bowl
Dough Blade
Assembly
1
Bread dough
Pie dough
Pizza dough
Pretzel dough
Dough Mixing Bowl
Dough Blade
Assembly
1 Cookie dough
Processing
Pitcher/Bowl
Nutri Ninja Cup
Stacked Blade
Assembly
Nutri Ninja Blade
Assembly
2
Pulse
Single Serve
Pâtés
Stewed fruits
Dips
Apple sauce
Spreads
Soups*
Baby food
Emulsifying Bowl
Chopping Blade
Assembly
2
Salad Dressings
Dips
Sauces*
Grinding Bowl
Chopping Blade
Assembly
2 Meat
Grating
Bowl
Nutri Ninja Cup
Chopping Blade
Assembly
Nutri Ninja Blade
Assembly
3 or Pulse
Single Serve
Grated cheese
Bread crumbs
Spices
Chopping
Bowl
Nutri Ninja®
Cup
Pitcher
Chopping Blade
Assembly
Nutri Ninja Blade
Assembly
Stacked Blade
Assembly
Pulse
Single Serve
3
Salsa
Vegetables
Nuts
Mixing Bowl
Dough Blade
Assembly
1
Light cake mixes
Batters
Ice Crushing
Pitcher
Nutri Ninja Cup
Stacked Blade
Assembly
Nutri Ninja Blade
Assembly
3
Single Serve
Ice
Pureeing
Pitcher
Nutri Ninja Cup
Stacked Blade
Assembly
Nutri Ninja Blade
Assembly
3
Single Serve
Smoothies
Smooth soups
Milkshakes
* When blending sauces and soups, make sure they’re cooled to room temperature first. Ninja® containers
are not intended for hot blending.
19ninjakitchen.com
18 ni njakitchen.com
The One (1) Year Limited Warranty applies to purchases made from authorized retailers of
SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the
original product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship
for a period of one (1) year from the date of purchase when it is used under normal
household conditions and maintained according to the requirements outlined in the
Owner’s Guide, subject to the following conditions and exclusions:
What is covered by this warranty?
1. The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole
discretion, will be repaired or replaced up to one (1) year from the original purchase date.
2. In the event a replacement unit is issued, the warranty coverage ends six (6) months
following the receipt date of the replacement unit or the remainder of the existing
warranty, whichever is later. SharkNinja reserves the right to replace the unit with one
of equal or greater value.
What is not covered by this warranty?
1. Normal wear and tear of wearable parts (such as blending vessels, lids, blades,
blender bases, etc.), which require regular maintenance and/or replacement to ensure
the proper functioning of your unit, are not covered by this warranty. Replacement
parts are available for purchase at ninjaaccessories.com.
2. Any unit that has been tampered with or used for commercial purposes
3. Damage caused by misuse, abuse, negligent handling, failure to perform required
maintenance (e.g., failure to keep the well of the motor base clear of food spills and
other debris), or damage due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by SharkNinja. These defects
include damages caused in the process of shipping, altering, or repairing the
SharkNinja product (or any of its parts) when the repair is performed by a repair
person not authorized by SharkNinja.
6. Products purchased, used, or operated outside North America.
How to get service
If your appliance fails to operate properly while in use under normal household conditions
within the warranty period, visit ninjakitchen.com/support for product care and maintenance
self-help. Our Customer Service Specialists are also available at 1-877-646-5288 to assist
with product support and warranty service options, including the possibility of upgrading
to our VIP warranty service options for select product categories. So we may better assist
you, please register your product online at registeryourninja.com and have the product on
hand when you call.
SharkNinja will cover the cost for the customer to send in the unit to us for repair or
replacement. A fee of $20.95 (subject to change) will be charged when SharkNinja ships
the repaired or replacement unit.
How to initiate a warranty claim
You must call 1-877-646-5288 to initiate a warranty claim. You will need the receipt as proof
of purchase. We also ask that you register your product online at registeryourninja.com and
have the product on hand when you call, so we may better assist you. A Customer Service
Specialist will provide you with return and packing instruction information.
How state law applies
This warranty gives you specific legal rights, and you also may have other rights that vary
from state to state. Some states do not permit the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you.
ONE (1) YEAR LIMITED WARRANTY
TROUBLESHOOTING GUIDE
WARNING: To reduce the risk of shock and unintended operation,
turn power o and unplug unit before troubleshooting�
Motor Doesn’t Start or Blade Assembly Doesn’t Rotate�
• Make sure the container is securely locked on the motor base.
• Make sure the lid is securely on the container in the correct position (align arrows).
• The appliance is turned “O”. Press the power button (
) to turn “On”.
• Check that the plug is securely inserted into the electrical outlet.
• Check the fuse or circuit breaker.
• The unit has overheated or overloaded. Unplug and wait approximately 15 minutes
before usingagain.
• Check to make sure the unit is not overloaded.
Food is Unevenly Chopped�
• Either you are chopping too much food at one time, or the pieces are not of even size
and processing smaller amounts per batch.
Food is Chopped Too Fine or is Too Watery�
• The food has been over processed. Use pulse button for controlled processing.
Food Collects On Lid or On the Sides of the Container�
• The mixture is too thick. Add more liquid.
You Cannot Achieve Snow From Solid Ice�
• DO NOT use ice that has been sitting out or has started to melt. Use ice straight
from the freezer.
• Start with a few pulses and then go to a continuous blending cycle.
Motor Base Won’t Stick to Counter or Table Top�
• Make sure surface and suction feet are wiped clean. Suction feet will only stick to
smooth surfaces. Suction feet WILL NOT stick on some surfaces such as, wood, tile
and non-polished finishes.
• DO NOT attempt to use appliance when the motor base is stuck to a surface that is
not secure, (cutting board, platter, plates, etc.).
19ninjakitchen.com
18 ni njakitchen.com
The One (1) Year Limited Warranty applies to purchases made from authorized retailers of
SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the
original product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship
for a period of one (1) year from the date of purchase when it is used under normal
household conditions and maintained according to the requirements outlined in the
Owner’s Guide, subject to the following conditions and exclusions:
What is covered by this warranty?
1. The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole
discretion, will be repaired or replaced up to one (1) year from the original purchase date.
2. In the event a replacement unit is issued, the warranty coverage ends six (6) months
following the receipt date of the replacement unit or the remainder of the existing
warranty, whichever is later. SharkNinja reserves the right to replace the unit with one
of equal or greater value.
What is not covered by this warranty?
1. Normal wear and tear of wearable parts (such as blending vessels, lids, blades,
blender bases, etc.), which require regular maintenance and/or replacement to ensure
the proper functioning of your unit, are not covered by this warranty. Replacement
parts are available for purchase at ninjaaccessories.com.
2. Any unit that has been tampered with or used for commercial purposes
3. Damage caused by misuse, abuse, negligent handling, failure to perform required
maintenance (e.g., failure to keep the well of the motor base clear of food spills and
other debris), or damage due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by SharkNinja. These defects
include damages caused in the process of shipping, altering, or repairing the
SharkNinja product (or any of its parts) when the repair is performed by a repair
person not authorized by SharkNinja.
6. Products purchased, used, or operated outside North America.
How to get service
If your appliance fails to operate properly while in use under normal household conditions
within the warranty period, visit ninjakitchen.com/support for product care and maintenance
self-help. Our Customer Service Specialists are also available at 1-877-646-5288 to assist
with product support and warranty service options, including the possibility of upgrading
to our VIP warranty service options for select product categories. So we may better assist
you, please register your product online at registeryourninja.com and have the product on
hand when you call.
SharkNinja will cover the cost for the customer to send in the unit to us for repair or
replacement. A fee of $20.95 (subject to change) will be charged when SharkNinja ships
the repaired or replacement unit.
How to initiate a warranty claim
You must call 1-877-646-5288 to initiate a warranty claim. You will need the receipt as proof
of purchase. We also ask that you register your product online at registeryourninja.com and
have the product on hand when you call, so we may better assist you. A Customer Service
Specialist will provide you with return and packing instruction information.
How state law applies
This warranty gives you specific legal rights, and you also may have other rights that vary
from state to state. Some states do not permit the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you.
ONE (1) YEAR LIMITED WARRANTY
TROUBLESHOOTING GUIDE
WARNING: To reduce the risk of shock and unintended operation,
turn power o and unplug unit before troubleshooting�
Motor Doesn’t Start or Blade Assembly Doesn’t Rotate�
• Make sure the container is securely locked on the motor base.
• Make sure the lid is securely on the container in the correct position (align arrows).
• The appliance is turned “O”. Press the power button (
) to turn “On”.
• Check that the plug is securely inserted into the electrical outlet.
• Check the fuse or circuit breaker.
• The unit has overheated or overloaded. Unplug and wait approximately 15 minutes
before usingagain.
• Check to make sure the unit is not overloaded.
Food is Unevenly Chopped�
• Either you are chopping too much food at one time, or the pieces are not of even size
and processing smaller amounts per batch.
Food is Chopped Too Fine or is Too Watery�
• The food has been over processed. Use pulse button for controlled processing.
Food Collects On Lid or On the Sides of the Container�
• The mixture is too thick. Add more liquid.
You Cannot Achieve Snow From Solid Ice�
• DO NOT use ice that has been sitting out or has started to melt. Use ice straight
from the freezer.
• Start with a few pulses and then go to a continuous blending cycle.
Motor Base Won’t Stick to Counter or Table Top�
• Make sure surface and suction feet are wiped clean. Suction feet will only stick to
smooth surfaces. Suction feet WILL NOT stick on some surfaces such as, wood, tile
and non-polished finishes.
• DO NOT attempt to use appliance when the motor base is stuck to a surface that is
not secure, (cutting board, platter, plates, etc.).
SharkNinja Operating LLC
US: Needham, MA 02494
CAN: Ville St-Laurent, QC H4S 1A7
1-877-646-5288
ninjakitchen�com
Illustrations may dier from actual product. We are constantly striving to
improve our products, therefore the specifications contained herein are
subject to change withoutnotice.
MEGA KITCHEN SYSTEM, NINJA, and NUTRI NINJA are registered trademarks
of SharkNinja Operating LLC.
This product may be covered by one or more U.S. patents.
See sharkninja.com/patents for more information.
© 2022 SharkNinja Operating LLC
BL770Series�IB�REV�Mv7
@ninjakitchen
