Loading ...
Loading ...
Loading ...
POWERING THE OVEN
1 Plug the RCD into electrical socket. Switch
socket on.
2 Press RESET button on the RCD. The circle above
the RESET button should be illuminated orange.
If this isn’t the case, try a dierent socket. Note:
It may be dicult to see the orange if in direct
sunlight.
3 Press the TEST button on the RCD. The circle
should now show black. This means the RCD is
functioning correctly. If pressing the TEST button
does not change the circle to black then contact
customer services.
4 After establishing if the RCD is functioning
correctly once again press RESET. The orange
illumination should re-appear. The unit can now be
switched on.
NOTE: RCD Light;
ORANGE = RCD is ON ; BLACK = RCD is OFF
5 Press the on/o switch on the back
of the control panel. Switch is on
when the side with the line is
pressed down.
6 Now turn the dial on the front of the control panel
and turn it to the desired function. The display
should illuminate to reveal times or temps. The
oven is now ready to use.
NOTE: The RESET button on the RCD will need
to be pressed every time the unit is unplugged or
the socket switched o.
EXTENSION CORD
If using an extension cord, ensure it is suitable for
use outdoors with outdoor appliances. Using the
incorrect cord could lead to the cord overheating,
melting and/or a drop in voltage. A drop in voltage
can increase preheat times and impact cooking
performance and/or cook times.
3 4
ninjakitchen.co.uk
ninjakitchen.co.uk
SMOKE BOX
Installing the smoke box:
To install, open by
putting your finger on the side insert to hold the
box open and insert the removable smoke box so
it sits firmly in place.
Adding Ninja Woodfire Pellets:
Fill the pellet
scoop to the top and level o to avoid spilling.
While holding the smoke box lid open, pour
pellets into the smoke box until filled to the top.
Then, close the smoke box lid.
For best results, performance, and flavour, use
only Ninja Woodfire Pellets.
Removing and cleaning the smoke box:
To
avoid burns, allow pellets to cool completely
before removing from the oven and cleaning.
HOW TO INSTALL THE ACCESSORY FRAME:
1
Install Accessory Frame in the bottom
level of the oven (top level if using the Grill
function).
2
If cooking pizza, place the Pizza Stone on
the Accessory Frame.
3
For all other functions, remove the Pizza
Stone and place the Pro-Heat Tray in the
Accessory Frame.
4
If using the Roast Rack, nest it in the
Pro -Heat Tray.
BEFORE FIRST USE – CONT’D
Loading ...
Loading ...
Loading ...