Fisher & Paykel WL1064P1 10kg Top Load Washing Machine with UV Sanitise and Auto Dose

User Manual - Page 5

For WL1064P1.

PDF File Manual, 42 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
5
SAFETY AND WARNINGS
MODEL CODE MAX CAPACITY* (KG)
WL1064P1 10
WL1264P1 12
*Capacity refers to the maximum dry weight of items the washer can wash at any one time.
(Note: Cycle dependent)
z
Do not overload your washing machine beyond its rated capacity.
z
Do not wash an electric blanket in your washer unless the care label specifically states
it is safe to do so.
z
Do not wash curtains in this washer, as sunlight makes them brittle and they may
disintegrate during washing.
z
The only user-removable parts of the washer are the inlet hose(s), the drain hose, the
dispenser funnels (tops) and lint filters. No other parts are designed to be removed by
anyone other than a Fisher&Paykel trained and supported service technician.
Installation
z
For guidance on how to install your product, please refer to installation instructions
provided with your product.
Water supply requirements:
z
Inlet water static pressure: Max. 1MPa (145psi), Min. 50kPa (7.3psi).
z
Inlet water flow rate at tap: Min. 8 litres /min.
z
A pressure-reducing valve must be installed if pressure is higher than 1MPa.
z
For optimum wash performance check the supply pressure is within the
recommendedrange.
z
New hose sets provided with the washer should be used to connect the washer to the
water mains. Old hose sets should not be re-used.
z
We recommend the inlet hose(s) are changed every 5 years. WARNING: Failure to do so
may result in a flood and damage to property.
z
The hot water temperature should not exceed 65°C and the cold water temperature
not exceed35°C. Temperatures above these may cause the machine to fault or cause
damage to the machine.
z
Install the machine on a solid and level floor surface ensuring it has at least 20mm
clearance on each side. The washer must not be installed on any textured floor
coverings (eg carpet, rugs).
Disposal
z
When disposing of the washer, it is recommended that the lid is removed to
avoidchildren getting trapped inside, and that the electrical cable is cut off
close to thewasher.
Loading ...
Loading ...
Loading ...