Loading ...
Loading ...
Loading ...
35
Wash problems
PROBLEM POSSIBLE CAUSES WHAT TO DO
Wash cycle time
longer than usual
If water pressure is low, cycle
time will increase due to longer
fill times.
Ensure that inlet hose filters are
not blocked.
The out of balance automatic
recovery setting may be set to 3.
Refer to ‘Option Adjustment mode’.
Wash cycle time is approximate
and may be affected by a
number of factors including load
size, water pressure, and which
options are selected.
Refer to ‘Wash cycles’.
Small amount of
water in drum at end
of cycle
A small amount of water may
discharge from the fill nozzle
after a wash.
This is normal.
Liquid remaining
in fabric softener
dispenser at end of
cycle
After flushing the dispenser,
a small amount of water may
remain in the dispenser at the
end of the cycle.
This is normal.
Dispenser may be blocked. Try cleaning your fabric softener dispenser
to remove any blockages, refer to ‘Care and
cleaning’.
Creasing Overloading of the washer. Try reducing load size.
Inappropriate cycle selection. Choose
EASY IRON as this cycle has been
designed to minimise creasing.
Spin speed too high. Try selecting a lower spin speed.
Wash temperature too high
for items.
Try selecting a lower wash temperature.
Other. Sort your load so that items of similar
weight are washed together.
Do not leave wet clothes to sit in the
washer or laundry basket.
TROUBLESHOOTING
Loading ...
Loading ...
Loading ...